- New
zł11.28
LR1262 Node Board LoRaWan Node - LoRa 868MHz communication module
ID: 1201688
5902186331945
zł80.18
Tax included
zł65.19 tax excl.
LoRaWAN node module based on the RP2040 chip and the LR1262 radio module, enabling communication in the 868 MHz band. It supports point-to-point (LoRa P2P) transmission and LoRaWAN networks, making it ideal for IoT projects. Equipped with Crowtail connectors, a battery charging interface, and the ability to be powered by a solar panel, it allows for the creation of autonomous and energy-efficient field devices. Compatibility with Arduino and MicroPython facilitates rapid prototyping and application development. Elecrow LR1262 Node Board LoRaWan Node
Description
LR1262 Node is a high-performance LoRaWAN node module designed for long-range communication in the 868 MHz band. The device uses the RP2040 chip as the main controller and the LR1262 module for LoRa signal transmission and reception. With support for both point-to-point communication (LoRa P2P) and LoRaWAN networking, the module is ideal for creating smart sensor nodes in IoT systems. Combined with Crowtail series modules (Ax2, Dx2, IICx1, UARTx1), the LR1262 Node Board enables rapid development of applications such as weather stations, environmental monitoring systems, smart homes, or industrial automation.
Designed for outdoor use, the module includes a lithium battery charging circuit and a solar panel power interface, allowing the creation of autonomous and energy-efficient field devices. With six Crowtail connectors, users can easily connect popular sensors such as temperature and humidity, air quality, light, or PM2.5 dust sensors. Additionally, 20-pin GPIO headers are available for extending functionality with custom components. The board is compatible with Arduino and MicroPython, making it easy to start developing a wide variety of projects. The kit also includes a LoRa antenna and pin headers that can be soldered as needed. Its compact size, low power consumption, and extensive communication options make the LR1262 Node an excellent solution for IoT projects requiring reliable long-range wireless connectivity.
Features
- Main chip: Raspberry Pi RP2040, 264KB SRAM, 4MB Flash
- Processor: Dual-Core ARM Cortex-M0+ @ 133MHz
- Radio module: LR1262, supports 803–930 MHz frequency band
- Antenna interface: 1st generation IPEX
- Communication modes: LoRa P2P and LoRaWAN network
- Compatibility: Arduino, MicroPython
- Communication interfaces: 1x USB-C, 6x Crowtail connectors (2x analog, 2x digital, 1x UART, 1x IIC)
- GPIO headers: 2x10 universal pins
- Power interface: lithium battery, solar panel (5V 1A)
- Operating power supply: USB 5V / 1A
- Built-in battery charging and discharging circuit
- Compatible with over 150 Crowtail modules
- Easy pin installation with dual headers
- Dimensions: 35 × 50 mm
Kit contains
- LR1262 Node Board
- LoRa Antenna (868MHz/915MHz)
- Connector set
- USB-C Cable
1201688
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
An expansion module based on the SX1302 chip that transforms the Raspberry Pi into a complete LoRaWAN gateway. Equipped with GPS, a real-time clock (RTC), and a cooling fan, it ensures stable and precise operation in IoT applications. It supports the 868 MHz and 915 MHz bands and is compatible with most Raspberry Pi models. Its compact design and support for GPS, GLONASS, and BeiDou systems make it ideal for smart city projects, agriculture, and environmental monitoring. The Elecrow LR1302 868M/915M LoRaWAN Gateway
zł98.23
24h
Available quantity: 3
Available
Other products in the same category (16)
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
zł361.48
3 weeks
No product available!
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Included with a USB Type-C adapter. Waveshare RP2040-LoRa-HF-Kit
zł57.07
24h
Available quantity: 1
Available
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
zł164.81
24h
Available quantity: 1
Available
Radio module with 868 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0115
zł228.76
24h
Available quantity: 2
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
zł64.59
24h
Available quantity: 7
Available
An expansion module for the Wio Terminal development board, which features LoRa-E5 and Quectel L76-LB modules to provide LoRaWan and GNSS network communication. It allows the construction of compact IoT projects. Seeed Studio 114992728
zł186.89
24h
Available quantity: 2
Available
Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1
zł140.01
4 weeks
No product available!
The LoRa gateway based on the BCM2711 processor (ARM Cortex-A72, 1.5 GHz) with 4 GB RAM and 32 GB of memory on a micro SD card provides high performance and spaciousness, ideal for supporting IoT applications. Equipped with dual-band Wi-Fi, Bluetooth 5.0, 4G/LTE, GNSS, HDMI and Gigabit Ethernet ports, and support for LoRa WAN (868 MHz), it offers reliable communication in harsh industrial conditions, and its IP65 housing guarantees protection against atmospheric factors. Edatec ED-GWL2110-14324-EU
zł1,972.11
5 weeks
No product available!
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł258.87
24h
Available quantity: 2
Available
Adafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078
zł183.27
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł68.15
4 weeks
No product available!
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
zł142.90
24h
Available quantity: 7
Available
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-HF-B
zł73.09
24h
Available quantity: 5
Available
M5Stack U111-B is an evaluation board with SIM7020G module, which supports NB-IoT and LTE Cat-NB communication, ideal for IoT applications requiring low power consumption. With support for TCP/IP, UDP and MQTT protocols and wide frequency range, the module provides reliable connectivity in different regions and remote monitoring applications
zł96.09
24h
Available quantity: 1
Available
The HLK-L06 module is a compact 433 MHz LoRa solution for wireless data transmission in IoT applications. modHK-L06
zł23.90
24h
Available quantity: 6
Available
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: LRWAN_NS1 and LRWAN_GS_LF1. STMicroelectronics P-NUCLEO-LRWAN3
zł506.86
1 weeks
No product available!
LoRaWAN node module based on the RP2040 chip and the LR1262 radio module, enabling communication in the 868 MHz band. It supports point-to-point (LoRa P2P) transmission and LoRaWAN networks, making it ideal for IoT projects. Equipped with Crowtail connectors, a battery charging interface, and the ability to be powered by a solar panel, it allows for the creation of autonomous and energy-efficient field devices. Compatibility with Arduino and MicroPython facilitates rapid prototyping and application development. Elecrow LR1262 Node Board LoRaWan Node