MAX30101 Breakout - module with pulse, SpO2 and smoke sensor
ID: 585236
zł99.73
Tax included
zł81.08 tax excl.
Module with heart rate sensor, SpO2 (oxygen saturation) and smoke levels. It is based on the MAX30101 chip and communicates via the I2C interface. Pimoroni PIM438
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with heart rate sensor, SpO2 (oxygen saturation) and smoke levels. It is based on the MAX30105 chip with three LEDs - green, red and infrared - and photodetectors that can be used to detect the amount of light reflected back to the sensor. A technique called photoplethysmography (PPG) can be used to detect a change in skin color with each heartbeat as the sensor is pressed against the fingertip. The module was designed with the high requirements of "wearable" devices in mind. Documentation with a library and examples in Python is available in the GitHub repository.
Features
- MAX30101 sensor
- Integrated protective glass
- Operation with very low energy consumption
- Built-in photo detector and red, IR and green LEDs in one housing
- Integrated temperature sensor with a resolution of 0.0625 ° C
- Compatible with all Raspberry Pi and Arduino models
- I2C interface
- I2C address: 0x57
- Supply voltage: 3 to 6 V
- Dimensions: 19 x 19 x 3.2 mm
Kit contains
- MAX30101 breakout
- 1x5 male header
- 1x5 female right-angle header
585236
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł6.32
24h
Available quantity: 320
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł6.32
24h
Available quantity: 218
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł6.16
24h
Available quantity: 87
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 66
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł6.21
24h
Available quantity: 78
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
Regular pricezł239.00zł217.00
24h
Available quantity: 201
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł287.00
24h
Available quantity: 108
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Regular pricezł419.00zł389.00
24h
Available quantity: 169
Available
Other products in the same category (16)
The module with the MAX30100 chip that monitors the oxygen content in the blood and the heart rate. It consists of two LED diodes, a photodetector, optimized optics and low noise analog signal processing. modMAX30100
zł14.90
24h
Available quantity: 14
Available
Disposable biomedical electrodes that allow you to perform experimental ECG measurements. DFRobot FIT0510
zł19.45
4 weeks
No product available!
Sensor module for electromyography (EMG). Allows muscle activity to be studied and used to control devices. SparkFun DEV-21265
zł219.00
6 weeks
No product available!
Module with a pulse sensor (heart rate). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 103020024
zł154.13
24h
Available quantity: 2
Available
A module with a sensor used to measure the activity of the heart. It allows you to strengthen and extract the heartbeat signals from biomedical electrodes. It has an analogue output and a heartbeat indicator (LED). SparkFun SEN-12650
zł94.70
24h
Available quantity: 4
Available
Heart rate measurement module compatible with Arduino and Raspberry Pi (Gravity: Heart Rate Monitor Sensor For Arduino). It uses PPG technique, which in a simple and cheap way is able to measure the changing volume of blood. DFRobot SEN0203
zł83.95
24h
Available quantity: 2
Available
Module with GSR skin resistance sensor. It is used to measure skin activity, which reflects the stress response and experienced emotions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020052
zł51.38
24h
Available quantity: 3
Available
Available
The sensor responds to chakra changes in the tissues by analyzing the reflected light (the module contains an illuminator and a sensor).
zł14.90
24h
Available quantity: 5
Available
Module with heart rate and SpO2 sensor (oxygen saturation level) MAX30100 designed for M5Stack sets. M5Stack U029
zł54.00
24h
Available quantity: 3
Available
Module with a pulse sensor and the level of SpO2 (oxygen saturation level). It is based on the MAX30102 chip, dedicated to the T-Wristband
zł38.90
24h
Available quantity: 2
Available
Heart rate monitor module based on the MAX30102 chip. Powered with the voltage from 3.3 to 5V, communication via the I2C interface.
zł8.30
6 weeks
No product available!
The module with a heart rate sensor and the SpO2 level dedicated to micro:bit. It is based on the MAX30102 chip and communicates via the I2C interface. SparkFun SEN-15271
zł62.77
24h
Available quantity: 2
Available
Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058
zł224.11
6 weeks
No product available!
Available
Evaluation board with built-in AD8232 heart monitor module and components placed in a way allowing effective implementation of medical and fitness applications, configuration of 2 or 3 electrodes
zł289.00
6 weeks
No product available!
Module with heart rate sensor, SpO2 (oxygen saturation) and smoke levels. It is based on the MAX30101 chip and communicates via the I2C interface. Pimoroni PIM438