1000RPM 6V N20E - miniature motor with gear and encoder
ID: 582334
5906623459582
zł41.77
Tax included
zł33.96 tax excl.
Small motor with metal gear and encoder, rotation speed 1000 RPM, operating voltage 6 V. GA46-N20E-0050
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The motor is equipped with an incremental encoder. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 1000 RPM and a maximum torque of 0,11 kg * cm, consuming a current from 0.054 A to 0.59 A.
Features
- Motor type: medium power (MP)
- Gear ratio : 15:1
- Supply voltage: 3-9 V
- Speed: 1000 RPM
- Maximum torque: 0,11 kg*cm
- Minimum current consumption: 0,054 A
- Maximum current consumption: 0,59 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
Recommended supply voltage for motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20E motors have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 14 g.
 |
| Dimensions of N20E micromotors (units in mm). |
|---|
Types and parameters of N20E engines:
Our offer includes N20E motors with gear ratios from 10: 1 to 380: 1.
| Gear ratio | Type | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 10:1 | MP | 6 V | 2000 RPM | 0,08 kg*cm | 54 mA | 0,59 A | LINK |
| 15:1 | MP | 6 V | 1000 RPM | 0,11 kg*cm | 54 mA | 0,59 A | LINK |
| 30:1 | MP | 6 V | 500 RPM | 0,22 kg*cm | 54 mA | 0,59 A | LINK |
| 50:1 | MP | 6 V | 300 RPM | 0,36 kg*cm | 54 mA | 0,59 A | LINK |
| 100:1 | MP | 6 V | 200 RPM | 0,8 kg*cm | 54 mA | 0,59 A | LINK |
| 150:1 | MP | 6 V | 150 RPM | 1,1 kg*cm | 54 mA | 0,59 A | LINK |
| 200:1 | MP | 6 V | 100 RPM | 1,4 kg*cm | 54 mA | 0,59 A | LINK |
| 250:1 | MP | 6 V | 60 RPM | 1,7 kg*cm | 54 mA | 0,59 A | LINK |
| 298:1 | MP | 6 V | 50 RPM | 2,0 kg*cm | 54 mA | 0,59 A | LINK |
| 380:1 | MP | 6 V | 30 RPM | 2,5 kg*cm | 54 mA | 0,59 A | LINK |
Wheels
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
Tracks
The silicone tracks to match the Pololu miniature motors are available in two lengths: 22T (48mm) and 30T (85mm) and three colors: white, black and red.
Brackets
Specially designed brackets matching the miniature Pololu engines will also work well when mounting N20 engines. They are available in two colors: white and black, and in a standard and extended version.
 |
 |
 |
| Pololu Miniature Motor Bracket (Black) | Pololu Miniature Motor Bracket Pololu (White) | Pololu Miniature Motor Bracket extended (White) |
Motors drivers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582334
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 15,25:1
- Rotation speed
- 1000RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 6V
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A high-power miniature Pololu from the HP series. The motor with gear 210:1, shaft speed is 150rpm, torque is 3kg*cm (0.3Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2216
zł103.68 24hAvailable quantity: 6 Available No product available!
Pololu high power miniature motor with carbon brushes. 50:1 gear motor, shaft speed 420 rpm, torque 0,54kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2379
zł97.66 24hAvailable quantity: 5 AvailableSmall metal gear motor, 500 RPM speed, 12V operating voltage. GA12-N20-0026
zł22.72 6 weeks No product available!
Small metal gear motor, 100 RPM speed, 6V operating voltage. GA12-N20-0014
zł20.10 6 weeks No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł98.87 24hAvailable quantity: 3 AvailableThis gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł100.87 6 weeks No product available!
A small low-power motor with a 250:1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 54 RPM, a maximum torque of 1.7 kg*cm and a double-sided shaft. Pololu 2207
zł101.66 6 weeks No product available!
Miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Pololu 3072
zł100.90 6 weeks No product available!
A small, high power motor with a 250:1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 120 RPM, maximum torque of 3.4 kg*cm and a double-sided shaft. Pololu 2217
zł101.66 6 weeks No product available!
Miniature high-power motor from the Pololu MP series. 100: 1 gear motor,
the rotation speed of the shaft is 220 rpm, the torque is 1.5 kg * cm (0.15 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2381zł94.29 24hAvailable quantity: 2 Available298:1 Micro Metal Gearmotor MP
zł87.80 24hAvailable quantity: 2 AvailableSmall metal gear motor, 60 RPM speed, 3V operating voltage. GA12-N20-0004
zł22.91 6 weeks No product available!
A small medium-power motor with a 5:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 4400 RPM and a maximum torque of 0.06 kg * cm. Pololu 2362
zł96.89 6 weeks No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł139.48 6 weeks No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł79.29 24hAvailable quantity: 2 Available
Small motor with metal gear and encoder, rotation speed 1000 RPM, operating voltage 6 V. GA46-N20E-0050