zł10,639.61
.png)
New products
New products New products
Soldered GNSS GPS Breakout NEO-M9N-00B - GNSS Module with Qwiic
ID: 1208374
zł266.42
Tax included
zł216.60 tax excl.
Satellite positioning module based on the u-blox NEO-M9N receiver, supporting GPS, GLONASS, Galileo, and BeiDou simultaneously. It provides typical horizontal accuracy of approximately 2 m and outputs data in NMEA 0183 and UBX formats. Communication is available via UART or I2C, while two Qwiic connectors simplify integration with devices using the I2C bus. Soldered 333378
Description
The module uses the u-blox NEO-M9N receiver with simultaneous support for GPS, GLONASS, Galileo, and BeiDou satellite systems. Typical horizontal positioning accuracy is 2.0 m CEP. Position data can be transmitted in the text-based NMEA 0183 format or the binary UBX format. The module can be used in outdoor navigation systems, coordinate logging, asset tracking, and positioning systems for robots and drones.
Communication is available via UART or I2C, with the active interface selected using the JP4 jumper. The I2C interface uses a fixed address of 0x42. The 1PPS output generates a configurable timing pulse synchronized with GNSS time, allowing the module to be used for precise timestamping or device synchronization. The board operates at 3.3 V and includes an onboard regulator for compatibility with 5 V systems. Two Qwiic connectors allow solderless connection to the I2C bus. Jumpers provide control over the power and PPS status LEDs, while an additional jumper connects the antenna RF filter.
Features
- GNSS IC: u-blox NEO-M9N
- Supported systems: GPS, GLONASS, Galileo, BeiDou
- Concurrent multi-GNSS support
- Horizontal position accuracy: 2.0 m CEP
- Data formats: NMEA 0183, UBX
- Communication interfaces: UART, I2C
- Interface selection: JP4 jumper
- I2C address: 0x42
- Configurable I2C address: no
- Timing output: configurable 1PPS
- Operating voltage: 3.3 V
- Onboard voltage regulator for 5 V systems
- Connectors: 2x Qwiic
- Arduino library: available
- MicroPython module: available
- Mounting holes: 2x M3
- Mounting hole diameter: 3.2 mm
- Dimensions: 38 x 54 mm
Kit includes
- Soldered GNSS GPS Breakout NEO-M9N-00B module
- u.FL to SMA antenna cable with panel-mount SMA connector
- Mounting nut
- Flat washer
- Spring washer
1208374
Other products in the same category (16)
MY-GPS008C GPS Module, MYIR
Regular pricezł335.81zł173.73
24h
Available quantity: 2
Available
Compact GNSS Module Integrated with Patch Antenna MT3333 Solution, Quectel, RoHS
zł54.19
24h
Available quantity: 3
Available
Adafruit 2324
zł156.54
24h
Available quantity: 4
Available
66 channel GPS receiver module LS20031. It communicates via the UART TTL interface with a refresh rate of up to 10 Hz. Pololu 2138
zł271.37
24h
Available quantity: 1
Available
Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use. Adafruit 2636
zł326.70
4 weeks
No product available!
The GPS module allows you to download the current coordinates of position and time, has a built-in GPS receiver FGPMMOPA6H. MOD-54
zł173.18
24h
Available quantity: 2
Available
No product available!
Module with a GPS receiver based on the MTK3333 system. Dedicated to Feather plates, communicates via the UART interface. Adafruit 3133
zł166.28
24h
Available quantity: 1
Available
Small GPS location module with L80-39 GPS chip, USB and TTL two ports,easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. The GPS module uses NMEA0183 communication protocol, integrated ultra-small SMA antenna connector. DFRobot TEL0119
zł201.61
4 weeks
No product available!
No product available!
Advanced expansion shield for Arduino. Supports SIM cards as well as NB-IoT / CAT-M cards. With the integrated GNSS (Global Navigation Satellite System) module, it supports GPS, GLONASS, Galileo and BeiDou navigation systems. The module is powered with a voltage from 7 V to 12 V. DFRobot DFR0572
zł216.58
24h
Available quantity: 3
Available
Available
KAmodRPi-GPRS-GPS is an overlay for Raspberry Pi 4 / 3B + / 3B / 2B / B + computers, which allows you to enrich the system with the ability to send data via GPRS, SMS transmission or work as a module for Bluetooth communication. This extension also offers the ability to receive satellite data from location systems - GPS and GLONASS.
Regular pricezł229.00zł206.10
24h
Available quantity: 45
Available
GPS module with 72-channel GNSS NEO-M8P-2 receiver. It can receive data from GPS, GLONASS and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 25mm. SparkFun GPS-15005
zł1,671.85
3 weeks
No product available!
GPS module with 72-channel GNSS NEO-M8U receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. Built-in accelerometer and gyroscope. SparkFun GPS-16329
zł404.30
24h
Available quantity: 2
Available
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-15712
zł363.44
24h
Available quantity: 3
Available
Satellite positioning module based on the u-blox NEO-M9N receiver, supporting GPS, GLONASS, Galileo, and BeiDou simultaneously. It provides typical horizontal accuracy of approximately 2 m and outputs data in NMEA 0183 and UBX formats. Communication is available via UART or I2C, while two Qwiic connectors simplify integration with devices using the I2C bus. Soldered 333378