New products

This Raspberry Pi Pico development board is based on the RP2350B microcontroller with dual Arm Cortex-M33 cores running at up to 150 MHz. It offers 520 KB of SRAM, 16 MB of Flash, and 8 MB of PSRAM, making it ideal for memory-intensive projects. It features a USB-C connector, a Qw/ST port for I2C sensors, an SP/CE connector, an SWD debug interface, and reset and boot buttons. Pimoroni PIM724

An educational platform based on the modern RP2350 microcontroller with two Arm Cortex-M33 cores up to 150 MHz, 520 KB of SRAM, and 16 MB of Flash memory. It features a 2.8" color IPS display with a resolution of 320 × 240 pixels, six user buttons, a piezo speaker, and a mini breadboard for solderless prototyping. Numerous GPIO, ADC, servo connectors, alligator clips, and two Qw/ST ports enable quick connection of sensors and actuators. Pimoroni PIM720

An educational platform based on the modern RP2350 microcontroller with two Arm Cortex-M33 cores up to 150 MHz, 520 KB of SRAM, and 16 MB of Flash memory. It features a 2.8" color IPS display with a resolution of 320 × 240 px, six user buttons, a piezo speaker, and a mini breadboard for solderless prototyping. Numerous GPIO pins, ADCs, servo connectors, alligator clips, and two Qw/ST ports enable quick connection of sensors and actuators. Pimoroni PIM744

A scaled-up, fully functional version of the Raspberry Pi Pico 2, designed for learning, demonstrations, and educational workshops. The board is based on the modern RP2350 microcontroller with two Arm Cortex-M33 or RISC-V Hazard3 cores clocked at up to 150 MHz, 520 KB of SRAM, and 4 MB of Flash memory. Large pads and holes allow for solderless connection of components using alligator clips. Pimoroni PIM747

A scaled-up, fully functional version of the Raspberry Pi Pico 2, designed for learning, demonstrations, and educational workshops. The board is based on the modern RP2350 microcontroller with two Arm Cortex-M33 or RISC-V Hazard3 cores clocked at up to 150 MHz, 520 KB of SRAM, and 4 MB of Flash memory. Large pads and holes allow for solderless connection using alligator clips. The kit includes a full set of large components, making it ideal for STEM education. Pimoroni PIM748

An advanced development board based on the modern RP2350 microcontroller, designed for demanding embedded projects, IoT, and prototyping. It maintains full compatibility with the Raspberry Pi Pico form factor while offering significantly higher performance thanks to a dual-core Arm Cortex-M33 processor and ample Flash and PSRAM. The built-in Raspberry Pi RM2 module provides 2.4 GHz Wi-Fi and Bluetooth connectivity, enabling easy integration with networks and cloud services. A USB-C connector, a Qw/ST interface for I²C modules, RESET and BOOT buttons, and a user LED make the Pico Plus 2W a convenient and versatile tool. Pimoroni PIM726

Miniature 15 V switching voltage regulator based on the AP63200 IC, input range 3.5 - 32 V, output current up to 1 A (1.5 A peak), efficiency up to 90%, dimensions 18 x 11 mm. KAmod-DCDC-AP63200 15V

The ESP32-PICO-MINI-02 development board features a dual-core 240 MHz Xtensa processor, 8 MB of Flash, and 2 MB of PSRAM. It offers 2.4 GHz WiFi, Classic Bluetooth, and BLE connectivity, making it ideal for IoT projects. It features 20 GPIOs, 12-bit ADC, DAC, and PWM inputs, as well as SPI, I2C (STEMMA QT), I2S, and UART interfaces. It also includes a built-in NeoPixel RGB LED. It features low power consumption (approximately 10 µA in deep sleep), USB or 6V battery power, and compatibility with the Arduino IDE, CircuitPython, and MicroPython. Adafruit 5889

Stepper motor driver module based on the ULN2003 IC in SMD package, integrating 7 Darlington transistor pairs with common emitter configuration, designed for controlling motors and relays

The ESP32-PICO-MINI-02 development board features a dual-core 240 MHz Xtensa microcontroller, 8 MB of Flash, and 2 MB of PSRAM. It offers 2.4 GHz WiFi, Classic Bluetooth, and BLE connectivity, making it ideal for IoT projects. It features 20 GPIOs, 12-bit ADC, DAC, and PWM inputs, as well as SPI, I2C (STEMMA QT), I2S, and UART interfaces. It also includes a built-in NeoPixel RGB LED. It features low power consumption (approximately 10 µA in deep sleep), USB or 6V battery power, and compatibility with the Arduino IDE, CircuitPython, and MicroPython. Adafruit 5890

Aluminum heatsink with fan for NVIDIA Jetson Orin NX/Nano, designed for use with modules with increased power up to 40W. It provides effective heat dissipation thanks to a solid aluminum heatsink and a 16.6 CFM fan, enabling stable operation in ambient temperatures up to 50°C. Powered by 12V via a 4-pin JST-XH connector, it is compatible with reComputer Super J401 and reComputer Robotics J401 boards. SeeedStudio 100021109

An industrial AI computer equipped with an NVIDIA Jetson AGX Orin 64GB module, offering up to 275 TOPS of computing power. It supports up to eight GMSL2 cameras and four CSI lines, making it ideal for mobile robots, AMR systems, and autonomous vehicles performing SLAM tasks or real-time image analysis. A rich set of interfaces, including 10G Ethernet, CAN-FD, RS-232/422/485, and numerous USB ports, provides extensive integration options. SeeedStudio 100032662

A 3D localization and mapping module with AI Deep Learning vSLAM technology, providing precise 6DOF positioning with an accuracy of ±5 cm. Equipped with a 180° fisheye stereo camera and inertial navigation, it enables mapping areas exceeding 1,000,000 m², even in challenging lighting conditions. The system supports fusion with external LiDAR, offering 2D map resolution up to 2 cm and a range of up to 40 m. With SDK support (C++, ROS1/ROS2, Python), it is suitable for mobile robotics, industrial automation, and autonomous vehicles. SeeedStudio 100035718

An AI module for local sound event recognition, operating without a cloud connection. It detects sounds such as baby crying, glass breaking, gunshots, smoke and CO alarms, and snoring, with an accuracy of ≥95% and a response time of up to 500 ms. The module is powered by an XMOS processor and a high-performance digital microphone, providing precise sound analysis while maintaining privacy. Compatible with Seeed Studio XIAO, ESPHome, and Home Assistant, it is ideal for home automation, security, and monitoring systems. SeeedStudio 100049596

Development board based on the ESP32-C6 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi 6 and Bluetooth 5 interfaces, onboard audio codec, microphones, speaker, and a 3.7 V lithium battery, designed for IoT projects and wearable applications. Waveshare ESP32-C6-Touch-LCD-1.83

Development board based on the ESP32-C6 microcontroller, featuring a 1.83 inch IPS touch display with 240 x 284 resolution, WiFi 6 and Bluetooth 5 connectivity, onboard audio codec, microphones, and speaker, designed for IoT projects and wearable applications. Waveshare ESP32-C6-Touch-LCD-1.83-EN

ESP32-P4-WIFI6-POE-ETH is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, industrial automation, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of I/O and multimedia interfaces. ESP32-P4-WIFI6-POE-ETH

ESP32-P4-WIFI6-POE-ETH-C is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-C

The ESP32-P4-WIFI6-POE-ETH-D is an advanced Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for HMI applications, edge computing, multimedia processing, and industrial systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE power supply, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-D

Development board based on the ESP32-S3-WROOM module with a dual-core 240 MHz processor, 32 MB Flash and 16 MB PSRAM, supporting 2.4 GHz Wi-Fi and Bluetooth LE, designed for IoT and AIoT projects. Waveshare ESP32-S3-DEV-KIT-N32R16V