zł118.43 tax excl.
Six-channel VIFLY WhoopStor 3 charger and discharger for 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Supports adjustable charging current from 0.3A to 1.3A per channel and Storage mode at 3.80V/3.85V. Power input via USB-C PD3.0, XT60 or DC connector. VIFLY WhoopStor 3
The device VIFLY WhoopStor 3 supports 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Six independent channels allow up to six batteries with different voltages and capacities to be handled simultaneously. When one channel completes its cycle, the battery can be disconnected and replaced without interrupting the operation of the remaining channels.
The charging current can be adjusted from 0.3A to 1.3A to match the capacity of the connected battery. WhoopStor 3 supports target voltages of 3.80V and 4.20V for LiPo batteries and 3.85V and 4.35V for LiHV batteries. The 3.80V and 3.85V settings are intended for battery storage, while 4.20V and 4.35V correspond to full-charge voltages. After selecting the target voltage, the charger automatically starts charging or discharging depending on the current battery voltage.

The color LCD displays information about the operation of individual channels, while the memory function retains the previously used settings. An integrated buzzer indicates the end of a charging cycle and can be disabled. A fan and heat sink provide heat dissipation during operation, particularly when discharging batteries.
Input power can be supplied through USB-C PD3.0, XT60 or a DC 5.5 × 2.1mm connector. The input voltage range is 6-26V for XT60 and DC and 9-20V for USB-C. The USB-C input uses the PD protocol and does not support standard 5V USB power. The minimum required input power is 40W. The enclosure measures 108 × 55 × 30mm and the device weighs 140g.
Six-channel VIFLY WhoopStor 3 charger and discharger for 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Supports adjustable charging current from 0.3A to 1.3A per channel and Storage mode at 3.80V/3.85V. Red enclosure version. VIFLY WhoopStor 3
Six-channel VIFLY WhoopStor 3 charger and discharger for 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Supports adjustable charging current from 0.3A to 1.3A per channel and Storage mode at 3.80V/3.85V. Black enclosure version. VIFLY WhoopStor 3
LiPo 3.7 V battery charger module with USB Type-C socket. DFRobot DFR0668
LiPo 3.7 V battery charger module with a microUSB socket. DFRobot DFR0667
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
USB charger equipped with XT60 input socket. It can be powered by Lipo 2-6S batteries. AOKoda QC3.0 USB Charger
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
No product available!
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
No product available!
A miniature module with a LiPo battery charger with a capacity of 500 mA. SparkFun DEV-11893
No product available!
LiPo 3.7 V battery charger module with USB type C socket. SparkFun PRT-15217
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
No product available!
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
Six-channel VIFLY WhoopStor 3 charger and discharger for 1S LiPo and LiHV batteries with PH2.0 and BT2.0 connectors. Supports adjustable charging current from 0.3A to 1.3A per channel and Storage mode at 3.80V/3.85V. Power input via USB-C PD3.0, XT60 or DC connector. VIFLY WhoopStor 3