RA4M1-Zero development board with 48 MHz microcontroller - Waveshare 30661
ID: 1198942
5902186308596
zł31.59
Tax included
zł25.68 tax excl.
RA4M1-Zero is a compact development board with an RA4M1 microcontroller, integrated USB interface, encryption support, and analog-digital peripherals. Designed for SMT mounting, it is suitable for serial solutions and projects requiring limited space.
Description
A miniature development board based on the Renesas RA4M1 microcontroller with an ARM Cortex-M4 core, clocked at 48 MHz. Equipped with a floating-point unit (FPU), 256 KB Flash memory, 32 KB SRAM, and 8 KB EEPROM. Integrated peripherals include a 14-bit ADC, 12-bit DAC, CAN bus controller, and USB 2.0 interface. Thanks to firmware encryption support, secure boot, and tamper protection, the module is suitable for projects requiring an increased level of security. An RGB WS2812 LED controlled from pin D6 enables status indication. Compatibility with Arduino IDE speeds up application development and testing. The board measures 18 × 23.5 mm and features castellated pads, allowing surface-mount installation in serial applications. The RA4M1-Zero version does not include pre-soldered goldpin headers.
Features
- Microcontroller: Renesas R7FA4M1AB3CFM (ARM Cortex-M4, 48 MHz)
- Built-in FPU, 256 KB Flash, 32 KB SRAM, 8 KB EEPROM
- 14-bit ADC, 12-bit DAC, CAN controller, USB 2.0
- Integrated RGB WS2812 LED controlled by pin D6
- Arduino IDE compatibility
- Board dimensions: 18 × 23.5 mm
- USB Type-C connector, host and device mode support
- BOOT button for uploading firmware
- RESET button
- LDO regulator ME6217C33M5G (max. 800 mA)
- Logic voltage selection: 3.3 V by default, switchable to 5 V
- Version without pre-soldered headers (RA4M1-Zero)
1198942
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
LPCXpresso55S28 evaluation kit with LPC55S28 microcontroller with ARM Cortex-M33 core. The board contains a built-in LPC-Link2 programmer, audio subsystem, accelerometer, microSD slot, USB interfaces and expansion connectors. NXP LPC55S28-EVK
zł279.83
24h
Available quantity: 1
Available
Available
The Lattice LCMXO2-1200ZE-P1-EVN kit enables quick startup with MachXO2 devices, offering a complete set of test functions and communication interfaces. It is ideal for learning PLD logic design, testing I²C and SPI buses, and implementing control and measurement applications.
zł498.99
24h
Available quantity: 1
Available
Experimenter Board with MSP430FR5739 MCU, TI, RoHS
zł196.80
24h
Available quantity: 1
Available
The development board FRDM-CR20A expansion board (shield) containing the wireless transmitter MCR20A 2.4 GHz, compatible with the existing development platforms Freedom - FRDM-K64F and FRDM-KL46Z. FRDM-CR20
zł665.71
24h
Available quantity: 2
Available
The EBB SB2209 CAN V1.0 (RP2040) is a compact extruder board featuring an RP2040 microcontroller and TMC2209 stepper driver, ensuring quiet and reliable motor operation via the CAN bus. Equipped with MAX31865 and ADXL345 sensors, support for BLTouch/Voron Tap, PH2.0 connectors, and fan ports with selectable voltage, it is an ideal solution for modern 3D printer toolheads.
zł136.52
24h
Available quantity: 9
Available
Evaluation kit with LittleBee GW1NR9 FPGA. It offers 8640 LUTs, 6480 Flip-Flops (FF), and has a built-in 8MB (64Mb) SDRAM. The board has 8 MB Flash, FTDI for UART, 8 LEDs and a button. TEC0117-01
zł311.95
4 weeks
No product available!
Available
The Freescale TWR-ELEV module is a key component of the Tower system, enabling the connection and powering of microcontroller and peripheral modules. It provides full communication and mechanical functionality, serving as a foundation for the development and testing of systems based on Freescale/NXP microcontrollers.
zł400.17
4 weeks
No product available!
The STEVAL-MKI063V1 board enables evaluation of the LSM303DLH sensor, which integrates a 3D accelerometer and magnetometer in a single device. With its USB interface and dedicated software, it serves as a practical tool for spatial orientation analysis and the implementation of electronic compass functions in embedded systems.
zł384.79
24h
Available quantity: 2
Available
Module for learning the basics of electronic engineering; illustrates the relationship between voltage, current, and allows the generation and observation of signals. It has the ability to sample the signal up to 200kSPS in a 16-bit converter. Powered from the USB port. ADALM1000
zł559.00
1 weeks
No product available!
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). EKB DPM-E4750RGBLC
zł9,527.15
6 weeks
No product available!
Base board for dipPLD modules with XC2C256 (CoolRunner-II by Xilinx)
zł159.00
24h
Available quantity: 29
Available
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). Green light illumination. EKB DPM-E4750LCG-OX
zł13,762.05
6 weeks
No product available!
Xplorer ++ Baseboard - development kit
zł174.14
24h
Available quantity: 1
Available
9-axis expansion module with motion sensors. The module combines two integrated circuits: FXAS21002C 3-axis gyroscope and FXOS8700CQ 6-axis accelerometer/magnetometer. The board is equipped with connectors compatible with Arduino R3. NXP FRDM-STBC-AGM01
Regular pricezł69.00zł29.00
24h
Available quantity: 99
Available
RA4M1-Zero is a compact development board with an RA4M1 microcontroller, integrated USB interface, encryption support, and analog-digital peripherals. Designed for SMT mounting, it is suitable for serial solutions and projects requiring limited space.