tinySA Ultra+ ZS406 - 100kHz - 5.4GHz spectrum analyzer with 4" display
ID: 1197005
5902186301924
zł709.00
Tax included
zł576.42 tax excl.
Advanced spectrum analyzer with a working range from 100 kHz to 5.4 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS406
Description
tinySA Ultra+ is an advanced spectrum analyzer operating in the range of 100 kHz to 5.4 GHz. The ZS-406 model is one of the latest versions in the tinySA Ultra+ line and offers several improvements over previous models. The device features a 4-inch color resistive touchscreen and provides 450 scan points across the entire frequency band. With a built-in 5000 mAh battery, it delivers up to 3 hours of mobile operation. In addition to spectrum analysis, the device can function as a sine or square wave signal generator. Features such as band-pass filtering, automatic calibration, and input attenuator make it a comprehensive diagnostic tool for RF enthusiasts and professionals alike. The analyzer can be fully controlled from a PC via USB and supports AM, FM (narrow/wide) modulation, reference frequency output, and various RBW settings. It also supports automatic self-test and calibration using the built-in generator.
Ultra mode is disabled by default but can be easily enabled via CONFIG/MORE/ENABLE ULTRA command using unlock code 4321. Once enabled, ultra mode will remain enabled until disabled or FW updated.
Features
- Frequency range (analyzer): 100 kHz to 900 MHz (normal mode), 100 kHz – 5.4 GHz (ultra mode)
- Frequency range (generator): Sine: 100 kHz to 900 MHz, Square: up to 4.4 GHz
- Frequency resolution (generator): 44 Hz below 900 MHz
- Reference output: 1, 2, 4, 10, 15, or 30 MHz (square wave, -35.6 dBm)
- Display: 4" color resistive touchscreen
- Number of scan points: 450
- RBW bandwidth: 0.2 / 1 / 3 / 10 / 30 / 100 / 300 / 600 / 850 kHz or automatic
- Input impedance: 50 Ω (with attenuation >10 dB)
- Max input level: +6 dBm (at 0 dB attenuation)
- 1 dB compression point: -1 dBm (at 0 dB attenuation)
- Dynamic range (no interference, RBW 30 kHz): 70 dB
- Power measurement accuracy: ±2 dB (after calibration)
- Phase noise: -92 dBc/Hz (10 kHz offset), -108 dBc/Hz (100 kHz offset)
- Generator harmonics: < -40 dB from fundamental tone (100 kHz – 900 MHz)
- Signal modulations: AM, narrow FM, wide FM
- USB: Type C, full PC control
- Power supply: 5V via USB (max 1.3A)
- Battery: 5000 mAh (up to 3 hours of operation)
- ESD protection
- Dimensions: 117 x 72 x 23 mm
Kit contains
- tinySA Ultra+ spectrum analyzer (ZS-406)
- 2 × SMA cables
- SMA connector
- SMA antenna
- USB-C charging cable
- 32 GB microSD card
1197005
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 5.3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra
zł703.49
Delivery date unknown
No product available!
Spectrum analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 960 MHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA
zł406.96
24h
Available quantity: 5
Available
Advanced spectrum analyzer with a working range from 100 kHz to 8 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS407
zł878.99
24h
Available quantity: 4
Available
Other products in the same category (16)
DAQ device based on USB communication and equipped with 8 analog outputs, 8 digital inputs/outputs and one 32-bit counter. Offers 16-bit resolution. Digilent 6069-410-054
zł2,955.01
3 weeks
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
zł848.15
24h
Available quantity: 2
Available
Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F
zł339.11
24h
Available quantity: 2
Available
Portable electronic component meter (LCR tester). Allows testing of common components used in electronics, including diodes, transistors, capacitors and resistors. Fnirsi M328 Blue
zł73.49
6 weeks
No product available!
The leak tester for gas installations is a precise device that allows you to detect, among others: natural gas, propane, butane, methane, propanol, ethanol, ammonia, carbon monoxide, gasoline vapors, hydrogen sulfide. The device also reacts to water vapor, paint fumes, solvents, kerosene, smoke, etc.
zł120.68
4 weeks
No product available!
MCC USB-SSR24 is a control module for 24 SSR relays with optical isolation, USB communication, and support for popular programming languages. Digilent 6069-410-200
zł2,968.61
3 weeks
No product available!
DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 50 kS/s. Digilent 6069-410-012
zł1,435.14
3 weeks
No product available!
Digital Brix refractometer, enabling fast and precise measurement of sugar concentration in the range from 0% to 55%. Equipped with a 1.54” IPS color screen and automatic zeroing and data saving functions, it is perfect for the food industry, agriculture and laboratories. Compact design, built-in 600mAh battery and USB-C charging make it a convenient and mobile tool for daily quality control. Fnirsi JBM-20
zł149.00
6 weeks
No product available!
Test probes with silver-plated brass tips are a high-quality tool for every electronics professional. Their precision, durability and resistance to high temperatures make them a reliable choice for specialists requiring the highest accuracy and reliability in their measurement work. YT-73077
zł21.03
24h
Available quantity: 6
Available
The Yato YT-30060 magnetic level, 400 mm in length, is a precise measuring tool made from high-quality aluminum profile. Equipped with two acrylic glass vials filled with yellow fluid, it provides excellent visibility and measurement accuracy. Additionally, the built-in magnet allows for stable adhesion to metal surfaces, making it easier to work on construction assembly or when setting profiles for drywall installations. Yato YT-30060
zł18.18
24h
Available quantity: 5
Available
Non-contact tachometer for rotational speed measurement. Equipped with a 5-digit display and a USB interface. UNI-T UT372
zł295.20
2 weeks
No product available!
DAQ device based on USB communication and equipped with 8 differential analog inputs and 8 digital inputs/outputs. It offers 24-bit resolution and is dedicated to temperature measurements. Digilent 6069-410-065
zł3,581.33
3 weeks
No product available!
The Uni-T UT383S is a compact lux meter measuring light intensity from 0 to 199,999 lux, ideal for monitoring lighting in various environments. Equipped with a modern sensor, LCD display and Data Hold function, it provides fast, accurate measurements and easy operation.
zł117.85
24h
Available quantity: 7
Available
Vector network analyzer with two ports. It can perform measurements at frequencies from 50 kHz to 3 GHz. Equipped with an IPS LCD display, it can be connected to a computer via a USB connector. Seeed Studio 113991034
zł1,199.00
4 weeks
No product available!
The electromagnetic field meter is used to measure electric radiation and magnetic emission. The device is also equipped with a temperature sensor. It also has the function of charging the batteries with a USB cable.
zł109.69
24h
Available quantity: 1
Available
DAQ device based on USB communication and equipped with 8 analog SE / DIFF inputs, two analog outputs, 4 digital I/O, two counters and two inputs for encoder support. It offers 18-bit resolution and a sampling rate of 200 kS/s. Digilent 6069-410-014
zł5,253.66
3 weeks
No product available!
Advanced spectrum analyzer with a working range from 100 kHz to 5.4 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS406