Pico Air WiFi Monitoring Expansion - module with WiFi and air quality sensor for Raspberry Pi Pico
ID: 1178287
5906623413553
zł284.79
Tax included
zł231.54 tax excl.
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342
Description
The module with the PMSA003 air quality sensor and BME280 pressure sensor and the ESP8266 WiFi module, designed to work with the Raspberry Pi Pico:
- ESP8266 communicates using the UART interface and AT commands, and supports the TCP / UDP communication protocol. It supports three WiFi STA, AP and STA + AP operation modes and has a built-in LWIP protocol stack.
- PMSA003 uses the laser scattering technique and allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles.
- BME280 is a temperature, humidity and pressure sensor. It is equipped with an I2C communication interface.
In addition, the module is equipped with a 0.91" OLED display, which communicates via the I2C interface. The board will be used in air treatment devices, air quality monitors and IoT projects. Full documentation with examples is available on the product page.
Pinout
Features
- PMSA003
- Particle measurement range: 0.3 to 1.0, 1.0 to 2.5, 2.5 to 10 µm
- Particle counting efficiency: 50% at 0.3 μm 98% at> = 0.5 μm
- Total response time ≤ 10 seconds
- Operating temperature range -10 to 60 ℃
- Operating humidity range 0 to 99%
- Storage temperature range -40 to 80 ℃
- MTTF ≥ 3 years
- UART interface
- ESP8266:
- UART interface
- Baudrate 115200 bps
- WiFi standard IEEE 802.11b / g / n
- The frequency band is from 2400 to 2483.5 MHz
- Operation modes: WiFi STA, WiFi AP, WiFi STA + AP
- PCB antenna
- BME280:
- Temperature measurement range: -40 to 85 ℃ (resolution 0.01 ℃, accuracy ± 1 ℃)
- Humidity measuring range: 0 to 100% RH (0.008% RH resolution, ± 3% RH accuracy, 1 s response time, delay ≤ 2% RH)
- Pressure measurement range: 300 to 1100 hPa (resolution 0.18 Pa, accuracy ± 1 hPa)
- I2C address: 0x76
- 0.91" OLED display
- Voltage: 5V
- Dimensions: 115 x 68 mm
1178287
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 354
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Regular pricezł29.90zł25.90
Delivery date unknown
No product available!
WiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888
zł75.50
24h
Available quantity: 2
Available
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
zł237.29
24h
Available quantity: 1
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 274
Available
Other products in the same category (16)
A programmable, retro-style console for the Raspberry Pi Pico, featuring a 96-LED 12x8 matrix, a speaker, and a vibration motor. The device features six control buttons and additional GPIO pins, allowing for project expansion and greater interactivity. Power is provided by three AA batteries housed in an ergonomic handle that also makes the console easier to hold. Kitronik 5347
zł100.90
24h
Available quantity: 1
Available
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
zł75.35
24h
Available quantity: 4
Available
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630
zł214.77
24h
Available quantity: 2
Available
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
zł53.90
24h
Available quantity: 2
Available
The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889
zł54.94
24h
Available quantity: 114
Available
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
zł39.54
4 weeks
No product available!
A base board that allows the Raspberry Pi Pico to control four DC motors or two stepper motors and eight servos, offering great flexibility for robotic projects. The board is equipped with dual H Bridge ICs to drive the motors, with full direction control and stopping functions, and power supplied via a terminal or servo connector, which increases its functionality. Additionally, thanks to the regulated 3.3V voltage, there is no need for a separate power supply for the connected Raspberry Pi Pico, simplifying the assembly process and integration with other devices. Kitronik 5329
zł89.36
24h
Available quantity: 5
Available
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor
zł163.90
24h
Available quantity: 4
Available
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
zł90.41
24h
Available quantity: 2
Available
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200
zł10.90
24h
Available quantity: 1
Available
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
zł237.29
24h
Available quantity: 1
Available
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
zł49.42
24h
Available quantity: 3
Available
Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231
zł37.13
24h
Available quantity: 2
Available
Programmable buzzer controller with six buttons, designed to work with Raspberry Pi Pico W and offering pinouts for many pins. It is ideal as a remote control for the Kitronik Autonomous Robotics (Buggy) platform, and thanks to its compact size and lack of a display, it is a cost-effective solution for controlling robots and vehicles in DIY projects. Kitronik 5353
zł57.58
24h
Available quantity: 3
Available
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
zł95.19
24h
Available quantity: 2
Available
A set for building a digital LED clock designed to work with the Raspberry Pi Pico. It has a built-in precision RTC DS3231 chip, light sensor, buzzer and configuration buttons. Waveshare Pico-Clock-Green-EN
zł106.38
24h
Available quantity: 2
Available
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342