Soft Power Switch JST 2mm - power switch with JST 2mm connector
ID: 1195525
5906623497577
zł29.83
Tax included
zł24.25 tax excl.
Power switch that allows you to control your system's power on and off with simple button presses, with the ability to force shutdown after 10 seconds. It features a durable control circuit, LEDs, a self-resetting fuse, and offers low quiescent current, making it ideal for energy-efficient projects. SparkFun PRT-26993
Description
SparkFun Soft Power Switch is a passive power switch with software control and feedback, functioning similarly to the power button on a laptop. A simple press turns the system on, and another press, with the appropriate microcontroller intervention, can turn the system off. In case of issues, holding the button for about 10 seconds will force a power-off. This is an ideal solution for projects requiring a reliable power button. The module features two JST 2mm connectors. The switch is extremely reliable and energy-efficient, based on a durable and fully digital IC from Texas Instruments. A built-in fuse automatically resets, protecting against overcurrent (2A), while the LED indicators show the operating status, and the extremely low standby current (<1µA) makes the device highly energy-efficient. To turn the system on and off, simply connect the PUSH and OFF pins to the microcontroller, which will monitor button presses and initiate a controlled shutdown sequence.
Additionally, you can adjust the on and off times of the device to create the ideal user experience. With this solution, you have full control over the system’s power, ensuring both energy savings and safety in case of malfunction.
Features
- Input voltage: 5.5V maximum, 1.8V minimum
- Maximum current: 2A continuous, 4A peak (protected by fuse)
- MOSFET SIL2308 N&P-Channel
- Typical P-Channel resistance: 70mΩ (0.070 Ohm)
- Very low standby current: <1µA at 3.75V (with VIN LED off)
- 2 x JST 2mm connectors
- Built-in momentary button
- Manual power-off after holding the button for about 10 seconds
- Pinouts: GND, VIN, VOUT
- Pinouts BTN, PUSH, OFF for additional button functions and outputs
- LEDs: VIN, VOUT (can be turned off)
- Board dimensions: 25.4 x 25.4 mm
- Weight: 3.1g
1195525
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
2-core connection cable, 15 cm long. Completed on one side with a 2x1 JST connector, and on the other with a 2mm pitch. CAB_E
zł0.75
24h
Available quantity: 9
Available
2-core cable, 20 cm long, with JST PH plug (2mm pitch). The ends of the wires are isolated and tinned
zł1.53
24h
Available quantity: 281
Available
Other products in the same category (16)
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
zł21.45
4 weeks
No product available!
The MP2307 converter module is an ideal solution for efficient and stable power supply of devices, offering a wide range of adjustable output voltages and continuous current up to 3 A. Thanks to the soft start function, it ensures long-lasting and reliable operation, protecting the system against sudden voltage spikes when switching on
zł13.84
24h
Available quantity: 19
Available
An efficient step-down converter that reduces the input voltage to 3.3 V at a maximum current of 100 mA, offering high efficiency thanks to its low quiescent current (<20 μA). It supports input voltages from 3.3 V to 65 V, has short circuit and overheating protection, making it a reliable and energy-efficient solution. Pololu 5362
zł22.60
4 weeks
No product available!
DC-DC step-down converter module 5V 16A used to convert energy from 6-24V input voltage to stable 5V, providing up to 16A current. Thanks to high conversion efficiency (over 90%) and low ripple (<20mV), it is ideal for powering sensitive devices in applications such as robotics, drones or LED lighting systems. Additionally, built-in overheating and short-circuit protection mechanisms ensure reliable operation even in difficult conditions. DFRobot DFR1202
zł56.40
24h
Available quantity: 6
Available
MT3608 is a compact, efficient step-up voltage converter in a SOT23-6 package, offered in a set of 5 pieces. It allows input voltage conversion from 2 V to 24 V into an output voltage of up to 28 V, with a maximum output current of 2 A.
zł8.67
24h
Available quantity: 41
Available
The Step-Down Converter Module with Voltmeter and Ammeter offers a wide input and output voltage range, with a maximum output current of 12A and a power of 160W. It comes with advanced monitoring and protection features and its conversion efficiency is around 96%.
zł76.15
24h
Available quantity: 3
Available
Power module with a USB Type-C connector based on the STUSB4500 system. It enables powering devices with voltages ranging from 5 V to 20 V and currents up to 5 A. Configuration via the I2C interface. SparkFun DEV-15801
zł149.90
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 9-60V to a stable 9V at a current of up to 10A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5676
zł229.73
6 weeks
No product available!
This miniature IEEE802.3af-compliant PoE module provides 5V power to devices at up to 8W without the need for a separate power cable. It supports both end-span and mid-span modes, offering high efficiency, electrical isolation, and easy integration into IoT and embedded systems. WIZnet WIZPoE-P1
zł51.71
5 weeks
No product available!
Step Down converter module with an output voltage of 5 V and a maximum current of 3 A. The board is equipped with two USB connectors
zł7.75
24h
Available quantity: 20
Available
The Step-Down D24V6AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 600 mA. Pololu 2104
zł37.77
4 weeks
No product available!
The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
zł50.43
24h
Available quantity: 3
Available
Module with a step-up converter with an input voltage from 10 V to 32 V and an adjustable output voltage from 15 V to 32 V. It has a maximum power of 150 W
zł44.72
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844
zł34.02
24h
Available quantity: 2
Available
Step Down converter module with an output voltage from 5 to 12 V and a maximum load of 3.4 A. The board is equipped with two USB connectors and has a built-in fast charging function for smartphones
zł17.59
4 weeks
No product available!
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 7.5 V and a maximum input of up to 2 A. Pololu 4943
zł25.07
24h
Available quantity: 3
Available
Power switch that allows you to control your system's power on and off with simple button presses, with the ability to force shutdown after 10 seconds. It features a durable control circuit, LEDs, a self-resetting fuse, and offers low quiescent current, making it ideal for energy-efficient projects. SparkFun PRT-26993