- Out-of-Stock
M5Stack ESP32 Basic Core IoT Development Kit V2.6 - IoT development kit with ESP32 module
ID: 1179011
5906623409587
M5Stack series development kit equipped with ESP32. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K001-V26
Description
A development kit from the M5Stack series equipped with ESP32. ESP32 is a module with a dual-core 32-bit Xtensa 240 MHz LX6 processor, with Wi-Fi and Bluetooth communication and 16 MB of Flash memory.
The set has a USB type C interface, which is used for charging, programming and serial communication, and an integrated screen with a diagonal of 2". The module is powered by a 110 mAh battery, managed by the IP5306 chip. and power and reset buttons The user also has at his disposal 3 programmable buttons and a connector with led GPIO pins.
M5Stack can be programmed via Arduino and UIFlow (using Blockly, MicroPython language). The set will be perfect for IoT-related projects, as a STEM educational module or in Smart Home devices. Full documentation of the set and guides are available on the manufacturer's website.
Features
- ESP32-D0WD-V3: 240 MHz, Dual Core, 600 DMIPS, 520 KB SRAM, Wi-Fi, Bluetooth
- Flash 16 MB
- Interface: USB type C, GROVE (I2C + I/O + UART)
- GPIO connector
- LCD TFT 2.0 "screen, 320x240 px, ILI9342C
- 1W-0928 speaker
- MicroSD card slot up to 16 GB
- Power button, RST button, 3 x user button
- 110mAh lithium battery @ 3.7V
- Antenna 2.4G 3D antenna
- Housing: PC
- Power supply: 5 V / 500 mA
- Operating temperature: 0°C to 40°C
- Dimensions: 54 x 54 x 18 mm
- Weight: 47.2 g
Kit contains
- M5Stack ESP32 Basic Core IoT Development Kit V2.6
- USB cable, type C, 20 cm
- 10 x connection cable
- User manual
- Stickers
1179011
Data sheet
- Microcontroller
- ESP32
- Flash memory
- 16 MB
- Number of I/O
- 01
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- Yes
- Length
- 54 mm
- Width
- 54 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010
zł249.59
Delivery date unknown
No product available!
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł49.21
24h
Available quantity: 3
Available
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
zł82.90
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526
Retired
No product available!
The system of a practical clock with an extremely simple design is equipped with a readable LED display, an alarm clock with a snooze function, and battery backup of the clock operation after a power failure
Retired
No product available!
Kit with DA7280 vibration motor driver module and LRA (Linear Resonant Actuator) motor. It allows you to add vibration feedback from the device to the project. SparkFun ROB-18247
Retired
No product available!
Kit with Jetson Mate base board designed for SoM modules NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 110991411
Retired
No product available!
Jetson Mate motherboard for NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 114992562
Retired
No product available!
ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SPX-17716
Retired
No product available!
RFID antenna designed for UHF RFID tags. It allows you to increase the effective range of tags to about 2.5 cm. SparkFun SPX-15113
Retired
No product available!
OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. It is equipped with Qwiic connectors and communicates via the I2C interface. SparkFun LCD-17153
Retired
No product available!
Starter kit with RedBoard development board and Qwiic modules: IMU, environmental sensor, GPS module, joystick, accelerometer, keyboard and proximity sensor, MP3 player, relay and OLED display. SparkFun KIT-16262
Retired
No product available!
QLED IPS 9" display with a touch screen and Quantum Dot technology. The display is equipped with an HDMI interface for image display and USB for the touch panel. Resolution 1280x720 pixels. Waveshare 9HP-CAPQLED
Retired
No product available!
QLED IPS 10.1" display with a touch screen and Quantum Dot technology. The display is equipped with an HDMI interface for image display and USB to the touch panel. Resolution 1280x720 pixels. Waveshare 10.1HP-CAPQLED
Retired
No product available!
Industrial DTU 4G module with Qualcomm SIM7600E-H chip. It allows you to connect industrial modules with serial communication via RS232, RS485 or TTL interfaces with 4G networks. Waveshare SIM7600E-H 4G DTU (EU)
Retired
No product available!
The power module is designed to work with solar panels. It is compatible with panels with an output voltage from 6 V to 24 V. It has a built-in 3.7 V lithium-ion battery with a capacity of 10 Ah. Waveshare Solar Power Manager (B)
Retired
No product available!
Improved version of the official HAT module, designed to power Raspberry Pi 4 and Raspberry Pi 3B + via Ethernet (PoE) cable. The use of the module eliminates the need for a separate power supply and reduces the number of cables needed. Raspberry Pi SC0468
Retired
No product available!
Cable with USB plugs type A and microUSB type B 2.0, cable length 3 m. LANBERG CA-USBM-10CC-0030-BK
Retired
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3200 mAh. Akyga AKY0926
Retired
No product available!
M5Stack series development kit equipped with ESP32. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K001-V26