- Out-of-Stock
e-Paper E-Ink 4-color 7.3" HAT 800x480 for Raspberry Pi (G) - Waveshare 22772
ID: 1181390
5906623423088
Module with e-Paper display, 7.3" diagonal and 800x480 px resolution. Communication via SPI interface. Waveshare 7.3inch e-Paper HAT (G)
Description
Module with an e-Paper display with a diagonal of 7.3" and a resolution of 800x480 px. It has the ability to display content with a two-level gray scale in four colors: red, yellow, black and white. The built-in controller communicates via the SPI interface. high contrast of the displayed image and they consume power only when the displayed content is changed The module is compatible with 3.3 V and 5 V systems. On the Wiki website support is available in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino i STM32.
Features
- Diagonal: 7.3"
- Resolution: 800x480 px
- Display color: red, yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.2 x 0.2 mm
- Full refresh time: 16 seconds
- Power consumption: 85 mW
- Viewing angle:> 170°
- No backlight, display the last content after power off
- Low energy consumption
- Working voltage: 3.3V, 5V
- Display size: 160 x 96 mm
- Outline dimension: 170.2 x 111.2 mm
Kit contains
- 7.3inch e-Paper HAT (G) Display
- E-Paper Driver HAT module
- FFC cable
- Board with two FFC connectors
- JST PH2.0 8-pin cable 20 cm
1181390
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 7,3
- Resolution
- 800 x 480 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 41
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
24h
Available quantity: 72
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Regular pricezł340.57zł338.00
Delivery date unknown
No product available!
4-color e-Paper display with a diagonal of 7.3" and a resolution of 800x480 px. Communicates via the SPI interface. Without a PCB. Waveshare 7.3inch e-Paper (G)
zł281.84
24h
Available quantity: 1
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
Other products in the same category (16)
Adapter dedicated to Omnivision cameras. Allows you to connect an image sensor to the evaluation kit. ArduCAM B0012
Retired
No product available!
Camera module 18 Mpx with AR1820HS sensor working with Raspberry Pi. It offers a video resolution of up to 4912x3684 pixels at 15 fps. ArduCAM B0164
Retired
No product available!
Camera module based on the OV13850 CMOS matrix with a resolution of 4224x3136 px (13 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0129
Retired
No product available!
ArduCAM OV9281 1MP Global Shutter USB Camera Evaluation Kit - Evaluation Kit with 1MP OV9281 166°...
A set with a camera with a resolution of 1 MPx with an OV9281 sensor, a USB 3.0 adapter and a cable. ArduCAM EK024
Retired
No product available!
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. Has a built-in 16 MB hardware frame buffer. ArduCAM B0175
Retired
No product available!
Micro analog servo with plastic gear. It has a range of motion of 90°. GH-S37A
Retired
No product available!
GSM/GPRS + GPS module based on the RDA8955 chip. It integrates protocol stacks such as GSM/GPRS and supports the basic functions of voice calls, SMS and GPS data transmission. DFRobot TEL0134
Retired
No product available!
Aluminum case for minicomputer Raspberry Pi 4 model B, black color
Retired
No product available!
Module with 7-color ACeP e-Paper display, 5.65" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.65
Retired
No product available!
HAT module with RTC DS3231SN clock and MAX705 reset system designed for Raspberry Pi and Jetson Nano. The board has a CR1220 battery socket and a C-type USB connector. Waveshare RTC WatchDog HAT
Retired
No product available!
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connectors placed in a vertical position and a connector for RPI 400 at an angle of 45 °. Waveshare PI400-GPIO-ADAPTER-C
Retired
No product available!
The power supply module with the RTC DS3231SN clock is designed for the Raspberry Pi. It allows you to power minicomputer with voltage up to 28 V and create scripts for the power-on sequence. Pimoroni WITTY_PI_3_R2
Retired
No product available!
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
Retired
No product available!
Mini board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. PIM577
Retired
No product available!
Module with a black and white e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM368
Retired
No product available!
Metal case with fan for Raspberry Pi 4 model B in black
Retired
No product available!
Module with e-Paper display, 7.3" diagonal and 800x480 px resolution. Communication via SPI interface. Waveshare 7.3inch e-Paper HAT (G)