- Out-of-Stock

WIFI-LPT100 is a single-stream WiFi module.
Type | Specification | Value |
---|---|---|
Wireless | Standard Certification | FCC/CE |
Protocol | 802.11 b/g/n | |
Frequency Range | 2.412GHz-2.484GHz | |
TX Power | 802.11b: +16 +/-2dBm (@11Mbps) | |
802.11g: +14 +/-2dBm (@54Mbps) | ||
802.11n: +13 +/-2dBm (@HT20, MCS7) | ||
RX Sensitivity | 802.11b: -93 dBm (@11Mbps ,CCK) | |
802.11g: -85dBm (@54Mbps, OFDM) | ||
802.11n: -82dBm (@HT20, MCS7) | ||
Antenna | External : I-PEX connector | |
Hardware | Standard Certification | RoHS compliant |
Data Interface | UART | |
PWM, GPIO | ||
Voltage Level | 2.8~3.6V | |
Operating Current | Emitting : ~200mA | |
Normal : avg ~12mA, peak 200mA | ||
Operating Temp. | -40?- 85? | |
Storage Temp. | -45?- 125? | |
Dimension | 22mm x 13.5mm x 6mm | |
Expansion connector | 1x10, 2mm pitch pinheader | |
Software | Wireless Network Type | STA/AP/STA+AP |
Security Algorithm | WEP/WPA-PSK/WPA2-PSK | |
Encryption | WEP64/WEP128/TKIP/AES | |
Firmware Upgrading | Web | |
Customization | Supports user customized web page | |
SDK provided for secondary development | ||
Network Protocol | IPv4, TCP/UDP/HTTP | |
Configuration | AT+instructions set, Web page | |
Android/iOS terminal, Smart Link APP |
Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/WIFI-LPT100
WIFI-LPT100 | WIFI-LPB100-A | WIFI-LPB100-B | WIFI232-A | WIFI232-B | EMW3162 | EMW3162 (B) | |
---|---|---|---|---|---|---|---|
Suit for | low flow | low flow | low flow | high flow | high flow | medium flow | medium flow |
AP mode connections | 2 | 2 | 2 | 32 | 32 | 4 | 4 |
STA mode connections | 5 | 5 | 5 | 32 | 32 | 8 | 8 |
AP+STA mode connections | 1 | 1 | 1 | 32 | 32 | 4 | 4 |
Power consumption | ultra low | ultra low | ultra low | high | high | ultra low | ultra low |
Interface | 2.0mm, 1x10 | stamp hole | stamp hole | 2.0mm, 2x7 | 2.0mm, 2x7 | 2.0mm, 2x15 | 2.0mm, 2x15 |
Antenna | external | onboard | external | onboard | external | onboard | external |
Shield case | × | √ | √ | √ | √ | √ | √ |
Dimension (mm) | 22 x 13.5 | 23.1 x 32.8 | 23.1 x 32.8 | 25 x 40 | 25 x 40 | 38 x 23 | 38 x 23 |
Weight: 0.002 kg
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
LPT100 WiFi Module Mother Board
No product available!
No product available!
Case for the Raspberry PI 2 model B, Raspberry PI 1 model B+ and Raspberry PI 3 computers, manufactured from high quality acrylic. CLEAR
No product available!
Printed circuit board to secure - a simple car lock. AVT3187 A
No product available!
No product available!
Laser distance sensor with a measuring range of up to 2 m, based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Waveshare VL53L0X Distance Sensor
No product available!
No product available!
Development board based on GD32VF103CBT6 MCU with 32-bit RISC-V core. It is equipped with an IPS RGB LCD display with a diagonal of 0.96 inch 160x80 and a housing. Seeed Studio 102991302
No product available!
No product available!
No product available!
Miniature vacuum pump powered by 12 V. Generates a vacuum that can be used, for example, in robotics
No product available!
No product available!
No product available!
5V / 3.1A eXtreme power supply with microUSB plug for all Raspberry Pi computers (including Pi 3 model B and Pi 3 model B +)
No product available!
No product available!
No product available!
LPT100 WiFi Module