.png)
- Out-of-Stock
Gravity: FXLN8361 Three Axis Accelerometer
ID: 560267
The FXLN8361 three-axis accelerometer is a module with the FXLN8361 accelerometer system detecting the acceleration of an object during three-axis motion. The module can be supplied with voltage in the range of 3.3 ... 8V and provides two measuring ranges ± 2g and ± 8g. DFRobot SEN0178
Description
The FXLN8361 three-axis accelerometer is a module with the FXLN8361 accelerometer system detecting the acceleration of an object during three-axis motion. The module can be supplied with voltage in the range of 3.3 ... 8 V and provides two measuring ranges ± 2g and ± 8g. The module can be used for applications such as motion detection, motion or action recognition. The accelerometer can be used in robotics, for example in drone or wheeled robots, as well as in game controllers. The data from the sensor is read out via analogue outputs.
Attention!
In order to increase the precision of the accelerometer, the module should be calibrated before use. The exact calibration guide is available in the manufacturer's Wiki guide .
In order to increase the precision of the accelerometer, the module should be calibrated before use. The exact calibration guide is available in the manufacturer's Wiki guide .
properties
- Analog outputs
- Available measuring range: ± 2g / 8g
- High accuracy of measurement
- Low-pass filter with internal signal processing function
- Stable performance, shock resistance
- Gravity connector
- Low energy consumption: 180 μA
- Power supply: 3.3 ... 8 V
- Module dimensions: 37.44 x 26.43 mm
Included
- Gravity Module: FXLN8361 Three Axis Accelerometer
- 3 x Gravity connection cable
560267
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Triple-Axis Accelerometer Module +-3g, Analog-Output, RoHS
zł73.14
24h
Available quantity: 1
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł22.74
24h
Available quantity: 6
Available
Versatile 9DOF sensor with accelerometer, magnetometer and gyroscope, supporting I²C and SPI interfaces, enabling precise measurement of motion, orientation and temperature, with easy integration with Arduino and microcontrollers. Adafruit 3387
zł117.64
24h
Available quantity: 4
Available
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
zł21.08
24h
Available quantity: 1
Available
Other products in the same category (16)
The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core.
Retired
No product available!
Arduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino. The board has built- in WiFi, supports 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connector, an ICSP header, two reset buttons and one user button.
Retired
No product available!
The Arduino 4 Relays Shield allows your Arduino driving high power loads that cannot be controlled directly by Arduino\'s digital pins. The Shield features four relays, each relay with 2 pole changeover contacts (NO and NC). Four LEDs indicate the on/off state of each relay. (A000110)
Retired
No product available!
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
Retired
No product available!
The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet).
Retired
No product available!
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field. A000070
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
Plastic holder that could fit all the boards with Arduino UNO size (68,6 mm x 53,4 mm). Contains 5 pieces in different colours. A000018
Delivery date unknown
No product available!
CryptoShield is a dedicated security peripheral for the Arduino. This shield adds specialized ICs that perform various cryptographic operations which will allow you to add a hardware security layer to your Arduino project. It also is a nice device for those performing embedded security research. DEV-13183
Retired
No product available!
No product available!
Banana Pi R1 acrylic clear case. The case needs to be assembled by yourself
Retired
No product available!
The housing for the Banner PI G1 Debugger made of transparent plastic. Housing for self-assembly
Retired
No product available!
The I2C electric level conversion module is specifically designed for Banana Pi. The module converts the 3.3V of I2C electric level to 5V level or converts 5V to 3.3V
Retired
No product available!
BPI AD/DA extend module with the PCF8591 single-chip, single-supply low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface
Retired
No product available!
No product available!
The FXLN8361 three-axis accelerometer is a module with the FXLN8361 accelerometer system detecting the acceleration of an object during three-axis motion. The module can be supplied with voltage in the range of 3.3 ... 8V and provides two measuring ranges ± 2g and ± 8g. DFRobot SEN0178