- Out-of-Stock
NVIDIA Jetson AGX Xavier development kit
ID: 572936
Development kit with SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. NVIDIA Jetson AGX Xavier Developer Kit
Product available on request
Description
Development Kit NVIDIA Jetson AGX Xavier Developer Kit with a SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. The system is supported by 16 GB DDR4 RAM memory, 32 GB eMMC memory, Ethernet connectivity and communication protocols such as UART, SPI, CAN, I2C, I2S or DMIC. NVIDIA Jetson AGX Xavier allows you to easily create and implement comprehensive AI robotics applications for production, delivery, retail and agriculture. NVIDIA Xavier is more than 20 times more efficient and 10 times more efficient than NVIDIA Jetson TX2.
properties
Jetson AGX Xavier
- GPU 512-core Volt GPU with Tensor cores
- CPU 8-core ARM v8.2 64-bit processor, 8 MB L2 + 4 MB L3
- 16 GB 256-bit LPDDR4 memory
- 32 GB eMMC memory 5.1
- DL Accelerator (2x) NVDLA
- 7-Way VLIW vision processor
- Encoder / decoder (2x) 4Kp60 | HEVC / (2x) 4Kp60 | 12 bit support
- 5 V, 9 ... 20 V power supply
- Power 10 ... 30 W
- The size is 105 x 105 mm
Motherboard I / O
- PCIe X16 x8 PCIe Gen4 / x8 SLVS-EC
- RJ45 Gigabit Ethernet
- USB-C 2x USB 3.1, DP (optional), PD (optional) debugging
- Camera connector (16x) CSI-2 belts
- NVMe
- PCIe x1 + USB 2.0 + UART (for Wi-F / LTE) / I2S / PCM
- 40-pin UART + SPI + CAN + I2C + I2S + DMIC + GPIO connector
- HD audio connector
- SATA Via PCIe x1 bridge (PD + data for 2.5-inch SATA) + USB 3.0
- HDMI 2.0 connector, eDP 1.2a, DP 1.4
- SD / UFS card slot
Included
- Jetson AGX Xavier module
- Motherboard
- 65 W power supply with power cable
- Cable type C to type A (USB 3.1 Gen2)
- Adapter type C for type A (USB 3.1 Gen 1)
572936
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Kit with NVIDIA Denver 2 CPU and ARM Cortex-A57 and NVIDIA Pascal graphics. It has 4 GB DDR4 RAM, 16 GB eMMC memory and 128 GB NVME SSD disk. Waveshare JETSON-TX2-NX-DEV-KIT-EU
zł2,035.04
Delivery date unknown
No product available!
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,189.00
24h
Available quantity: 10
Available
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
zł1,623.60
24h
Available quantity: 22
Available
Other products in the same category (16)
A module with a spectrum sensor that operates in the visible light range (450-650 nm). It allows you to measure and characterize a light source or check how the tested surface absorbs or reflects light at specific wavelengths. Pimoroni PIM412
Retired
No product available!
Module with a UV ultraviolet light sensor VEML6075. It enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. Pimoroni PIM460
Retired
No product available!
Module with 6-axis IMU motion sensor that combines a 3-axis accelerometer and a 3-axis magnetometer in one system. It communicates via the I2C bus. Pimoroni PIM376
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526
Retired
No product available!
The system of a practical clock with an extremely simple design is equipped with a readable LED display, an alarm clock with a snooze function, and battery backup of the clock operation after a power failure
Retired
No product available!
Kit with DA7280 vibration motor driver module and LRA (Linear Resonant Actuator) motor. It allows you to add vibration feedback from the device to the project. SparkFun ROB-18247
Retired
No product available!
No product available!
The Winstar WEH001602ABPP5N00100 OLED display is a character display with dimensions of 80×36×10 mm, capable of displaying 16 characters on 2 lines. It comes with a built-in WS0010-TX controller and operates within a power supply voltage range of 4.8–5.3 V and temperature range of -40°C to 80°C, offering excellent readability thanks to OLED technology.
Retired
No product available!
Kit with Jetson Mate base board designed for SoM modules NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 110991411
Retired
No product available!
Jetson Mate motherboard for NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 114992562
Retired
No product available!
ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SPX-17716
Retired
No product available!
RFID antenna designed for UHF RFID tags. It allows you to increase the effective range of tags to about 2.5 cm. SparkFun SPX-15113
Retired
No product available!
OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. It is equipped with Qwiic connectors and communicates via the I2C interface. SparkFun LCD-17153
Retired
No product available!
Starter kit with RedBoard development board and Qwiic modules: IMU, environmental sensor, GPS module, joystick, accelerometer, keyboard and proximity sensor, MP3 player, relay and OLED display. SparkFun KIT-16262
Retired
No product available!
QLED IPS 9" display with a touch screen and Quantum Dot technology. The display is equipped with an HDMI interface for image display and USB for the touch panel. Resolution 1280x720 pixels. Waveshare 9HP-CAPQLED
Retired
No product available!
Development kit with SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. NVIDIA Jetson AGX Xavier Developer Kit