Grove W600 - 2.4GHz WiFi module

Description

2.4 GHz WiFi module based on W600, supporting the 802.11 b/g/n standard. It is equipped with an ARM Cortex-M3 core with 1 MB built-in flash memory and freeRTOS. The module has two buttons (reset and configuration), 3 LEDs (power, reset and WiFi) and a PCB antenna. Configuration is done using AT commands sent via the UART interface. On the back of the board, there are also other interfaces, such as I2S, I2C, SI and GPIO. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. It communicates via the UART interface and is supplied with the voltage of 5 V.

Features

• IEEE802.11 b/g/n support
• Frequency 2.4 to 2.4835 GHz
• Wi-Fi WMM, WMM-PS, WPA, WPA2, WPS
• Support for multiple network protocols: TCP, UDP, ICMP, DHCP, DNS, HTTP
• Integrated GPIO device controller
• Supports AT+ instruction protocol based on ASCII encoding (UART interface)
• Supply voltage: 5 V
• Dimensions: 50 x 25 mm