- Out-of-Stock
SpaceCB-8Mplus-ADV is an advanced base board for the SpaceSOM-8Mplus family of modules equipped with a Neural Processing Unit (AI/Machine Learning applications). Together with the SoM (System on Module), it forms a complete SBC-like development platform. It contains the most popular interfaces such as USB 3.0, Ethernet, PCIe 3.0 (M.2), RS485, CAN FD, HDMI, LVDS, MIPI-DSI, MIPI-CSI, audio codec, etc. The large variety of interfaces allows it to be used both as a complete development platform and as a standalone end product. The board connects to the SoM via a standard SODIMM connector and is equipped with a Segger J-Link debugger and a serial console port dedicated to debugging.

Manufacturer
Responsible person
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.2
Camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0109
No product available!
Camera module based on CMOS MT9M001 matrix with a resolution of 1280x1024 px (1.3 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0160
No product available!
Adapter dedicated to Omnivision cameras. Allows you to connect an image sensor to the evaluation kit. ArduCAM B0012
No product available!
Camera module 18 Mpx with AR1820HS sensor working with Raspberry Pi. It offers a video resolution of up to 4912x3684 pixels at 15 fps. ArduCAM B0164
No product available!
Camera module based on the OV13850 CMOS matrix with a resolution of 4224x3136 px (13 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0129
No product available!
A set with a camera with a resolution of 1 MPx with an OV9281 sensor, a USB 3.0 adapter and a cable. ArduCAM EK024
No product available!
A set with a camera with a resolution of 1 MPx with an OV9281 sensor, a USB 2.0 adapter and a cable. ArduCAM EK023
No product available!
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. Has a built-in 16 MB hardware frame buffer. ArduCAM B0175
No product available!
Micro analog servo with plastic gear. It has a range of motion of 90°. GH-S37A
No product available!
GSM/GPRS + GPS module based on the RDA8955 chip. It integrates protocol stacks such as GSM/GPRS and supports the basic functions of voice calls, SMS and GPS data transmission. DFRobot TEL0134
No product available!
Aluminum case for minicomputer Raspberry Pi 4 model B, black color
No product available!
Module with 7-color ACeP e-Paper display, 5.65" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.65
No product available!
HAT module with RTC DS3231SN clock and MAX705 reset system designed for Raspberry Pi and Jetson Nano. The board has a CR1220 battery socket and a C-type USB connector. Waveshare RTC WatchDog HAT
No product available!
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connectors placed in a vertical position and a connector for RPI 400 at an angle of 45 °. Waveshare PI400-GPIO-ADAPTER-C
No product available!
The power supply module with the RTC DS3231SN clock is designed for the Raspberry Pi. It allows you to power minicomputer with voltage up to 28 V and create scripts for the power-on sequence. Pimoroni WITTY_PI_3_R2
No product available!
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1