- Out-of-Stock
ArduCAM CMOS AR1820HS 1/2.3 − inch 18MP Color Camera - module with 18MP AR1820HS camera for Raspberry Pi
ID: 587003
Camera module 18 Mpx with AR1820HS sensor working with Raspberry Pi. It offers a video resolution of up to 4912x3684 pixels at 15 fps. ArduCAM B0164
Description
The module with the sensor AR1820HS cooperating with the minicomputer Raspberry Pi. The sensor used has an 18 Mpx matrix and allows you to record video in a resolution of 4912x3684/15fps. The module is attached to the Raspberry Pi through a dedicated socket on the top side of the board. It uses the 4-lane MIPI CSI-2 interface specifically developed for use with cameras. Full documentation with the user manual is available on the product page. The set with the camera includes a 15-pin tape for connecting the camera to the Raspberry Pi model B and A, and a 22-pin tape for the Raspberry Pi Zero 2W and the Compute module.
Features
- Matrix: AR1820HS
- Resolution: 18 Mpx (4912 x 3684 pixels)
- Optical size: 1 / 2.3 inch
- Pixel size: 1.25 μm x 1.25 μm
- Coding: RGB
- ADC resolution: 12-bit
- Output interface: 4-lane MIPI
- IR filter
- Viewing angle: 75 °
- Frames per second:
- 4:3 - 18 MP at 15 fps (MIPI-4L)
- 16:9 - 14 Mp at 20 fps (MIPI-4L)
- 16:9 - 8 Mp at 30 fps (MIPI-4L)
- 16:9 - Full HD + 27.5% EIS at 60 fps
- 16:9 - Full HD at 120 fps
Kit contains
- ArduCAM CMOS AR1820HS 1/2.3−inch 18MP camera module
- FPC 22-pin 80 mm cable
- FPC 15-pin to 22-pin 150 mm adapter
587003
Data sheet
- Resolution
- 18 MPx
- Interface
- MIPI CSI-2
- Sensor
- AR1820HS
- IR filter
- Yes
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł525.00
Delivery date unknown
No product available!
Other products in the same category (16)
AVT kit for self-assembly of a thermostat with LED display. AVT3220 B
Retired
No product available!
Assembled thermostat with LED display. AVT3220 C
Retired
No product available!
A circuit board for the (half) home automation system - a four-channel ON / OFF module. AVT3212 A
Retired
No product available!
AVT kit for self-assembly of the (half) home automation system - four-channel ON / OFF module. AVT3212 B
Retired
No product available!
Assembled system (half) of home automation - four-channel ON / OFF module. AVT3212 C
Retired
No product available!
The PCF8574 IO expansion board is an 8-bit I / O expander controlled by the I2C interface. Up to 8 PCF8574 IO expansion cards can be connected to the I2C bus, providing up to 64 I / O ports. Waveshare 3708
Retired
No product available!
MYIR MYS-7Z0007S-C is a single board module based on the Xilinx XC7Z007S-1CLG400C chip (Zynq-7007S). This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
MYIR MYIR MYS-7Z010-LC is a set of elements with a single board computer based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) system. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
MYIR Z-turn Lite MYS-7Z010-LCS is a single board module based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) chipset. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
Z-turn IO Cape extension board is an extension board for Z-turn series tiles based on Xilinx Zynq
Retired
No product available!
No product available!
OLED display 128x64 pixels, 0.96 ", 3V power supply, SSD1306 controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP
Retired
No product available!
ODROID-HC2 is a mini PC with Samsung Exynos5422 Cortex-A15 2Ghz and Cortex-A7 Octa core CPUs
Retired
No product available!
No product available!
The module contains an input for SD cards and MicroSD cards. Waveshare SD Storage Board
Retired
No product available!
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Retired
No product available!
Camera module 18 Mpx with AR1820HS sensor working with Raspberry Pi. It offers a video resolution of up to 4912x3684 pixels at 15 fps. ArduCAM B0164