- Out-of-Stock
ArduCAM MINI IMX219 - module with IMX219 camera for Raspberry Pi CM
ID: 586898
5906623403950
Camera module with IMX219 sensor with a resolution of 8 MP designed for NVIDIA Jetson Nano / Xavier and Raspberry Pi Compute Module. ArduCAM B0342
Description
Camera module with IMX219 sensor with a resolution of 8 MPx designed for Raspberry Pi Compute Module (CM3, CM3+, CM4) and NVIDIA Jetson Nano and NVIDIA Jetson Xavier. It is equipped with a lens with an M12 mount with a viewing angle of 75°. The camera allows you to record movies with a resolution of 1080p/60fps, 720p/180fps or 8MP/21fps, has an integrated IR filter and communicates via the MIPI CSI interface. The board has dimensions of 24 x 25 mm, which makes it compatible with the popular Raspberry Pi Camera Board V2 module.
Features
Camera
- Sensor: IMX219
- Optical format: 1/4 ″
- Resolution: 3280 (H) x2464 (V) 8MP
- Pixel size: 1.12um x 1.12um
- IR sensitivity: visible light (built-in IR filter)
- Interface: MIPI CSI-2
- Default lens mount: M12 mount
- Frame rate: 1080p/60fps, 720p/180fps or 8MP/21fps
Lens
- Focal length: 2.8 mm
- Aperture (F): F2.8
- Field of View (FOV): 75 ° (H)
- Mounting: M12
Kit contains
- Module with 8MP IMX219 camera
- Lens
- FPC cable 15-pin 150 mm
586898
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- Yes
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
zł287.28
Delivery date unknown
No product available!
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
zł199.90
24h
Available quantity: 3
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
Regular pricezł1,999.06zł1,623.60
24h
Available quantity: 17
Available
Other products in the same category (16)
No product available!
LoRa module working on the 868 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23240
Retired
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564
Retired
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
Retired
No product available!
Prototyping kit dedicated to micro:bit. It offers pin leads, a contact plate, buttons, LEDs and a buzzer. SB Components 22717
Retired
No product available!
Module with WM8960 audio codec to support 1 W stereo speakers and two microphones via I2S interface. SB Components 24087
Retired
No product available!
UPS uninterruptible power supply module for Raspberry Pi, allowing the microcomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. SB Components UPS HAT
Retired
No product available!
SimpleFOC brushless motor driver module dedicated to Arduino boards. SimpleFOC Shield v2.0.4
Retired
No product available!
630 kV brushless DC motor. Powered by 2S to 4S packages, dedicated to drones, airplanes and camera stabilizers
Retired
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°, no IR filter. ArduCAM B006604N
Retired
No product available!
Laser scanner using ToF technology. It performs measurements with a frequency of 5 to 13 turns per second and has a range of up to 12 m. Waveshare DTOF LIDAR LD19
Retired
No product available!
The base plate is dedicated to the STM32F429I-DISCO set. It offers all microcontroller interfaces on the connectors located on the edge of the board. Waveshare Open429Z-D Standard
Retired
No product available!
The board with the microcontroller STM32F405RGT6 in the set with the base board and expansion modules. Waveshare Open405R-C Package B
Retired
No product available!
Development board with STM8S208MB microcontroller. It is equipped with numerous connectors, buttons and a joystick, thanks to which it can be used for prototyping devices. Waveshare Open8S208Q80 Standard
Retired
No product available!
Base plate dedicated to the STM32F4DISCOVERY set. It offers all microcontroller interfaces on the connectors located on the edge of the board. Waveshare Open407V-D Standard
Retired
No product available!
Wireless communication module based on the NRF24L01 chip. Equipped with an angular connector, it will be perfect for the construction of small devices. Waveshare NRF24L01 RF Board (B)
Retired
No product available!
Camera module with IMX219 sensor with a resolution of 8 MP designed for NVIDIA Jetson Nano / Xavier and Raspberry Pi Compute Module. ArduCAM B0342