Robotic arm 4DOF controlled by potentiometers (kit for self-assembly)
ID: 575047
zł207.76
Tax included
zł168.91 tax excl.
A set for self-assembly of a robotic arm with four degrees of freedom (4DOF) equipped with MG90S servomechisms. The arm at the end has a small gripper which allows you to catch and carry small objects. The handle is controlled using a plate compatible with Arduino Uno or a module with potentiometers.
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
A set for self-assembly of a four-degree robotic arm (4DOF) equipped with MG90S servomechanisms. The arm at the end has a small gripper which allows you to catch and carry small objects. The arm is controlled using a plate compatible with Arduino Uno or a module with potentiometers. It is an interesting and easy-to-use robotic arm control set.
properties
- Servomechanisms MG90S
- Number of degrees of freedom: 4
- Material: acrylic plates
- Driver: Board compatible with Arduino Uno R3
- Potentiometer control
Included
- A set of acrylic elements and screws
- A plate compatible with Arduino Uno R3
- 4 x servo MG90S
- Extension cord for servos with a length of 15 mm
- Extension module with potentiometers
575047
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 66
Available
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
zł123.63
Delivery date unknown
No product available!
Other products in the same category (8)
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
zł123.63
6 weeks
No product available!
Empower your Romi robot to manipulate its surroundings with this robotic arm accessory kit! The kit contains everything you need to build the arm, including a micro gripper and three servos—one for controlling the height of the arm, one for controlling the tilt of the gripper, and one for actuating the gripper paddles themselves.
zł483.64
6 weeks
No product available!
A robotic gripper based on the SG92R servo. It has an opening and closing angle of 90° and mounting holes compatible with Lego. M5Stack U102
zł41.91
24h
Available quantity: 1
Available
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0143
zł1,150.60
4 weeks
No product available!
A robotic arm with four degrees of freedom (4 DoF) based on servomechanisms and a controller with an ESP32 module. It can be controlled wirelessly via WiFi and a web browser or USB interface. Waveshare RoArm-M2-S (EU)
zł999.04
6 weeks
No product available!
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0142
zł1,150.60
4 weeks
No product available!
Four degrees of freedom (4DOF) robotic arm assembly kit. The robotic arm was based on servos and is controlled wirelessly using a Raspberry Pi. Waveshare Robot Arm for Pi (for Europe)
zł220.88
6 weeks
No product available!
A 5 DoF robotic arm built with servos and ESP32. It can be controlled wirelessly via WiFi and web browser or USB interface. Waveshare RoArm-M1 (EU)
zł1,599.00
6 weeks
No product available!
A set for self-assembly of a robotic arm with four degrees of freedom (4DOF) equipped with MG90S servomechisms. The arm at the end has a small gripper which allows you to catch and carry small objects. The handle is controlled using a plate compatible with Arduino Uno or a module with potentiometers.