AlphaBot2 - a set for building a robot with Raspberry Pi 3B/3B+/4B
search
  • AlphaBot2 - a set for building a robot with Raspberry Pi 3B/3B+/4B
  • AlphaBot2 - a set for building a robot with Raspberry Pi 3B/3B+/4B
ID: 586694
5906623424863
zł415.33
Tax included

zł337.67 tax excl.

Multifunctional robot with 2WD chassis and controller in the form of a Raspberry Pi minicomputer. It is a universal mobile platform that can, for example, follow a line or search for and avoid obstacles. Waveshare AlphaBot2-Pi Acce Pack

24h
Available
Available quantity: 1
Kamami is the official distributor of Waveshare displays, accessories and modules.

Description

AlphaBot2 is a set for building a two-wheeled mobile robot based on a Raspberry Pi minicomputer. Thanks to the sensors used, it performs all the functions that are needed by beginner robotics enthusiasts: following the line, avoiding obstacles, and even image processing. The set can move both in an autonomous mode and be remotely controlled by a mobile application and Bluetooth interface, WiFi or an IR remote control.

Attention!

The kit does not include the Raspberry Pi minicomputer and 14500 batteries. You must purchase them separately.

The set consists of two plates: the robot base with motors and an adapter plate. The base of the robot is equipped with connectors for connecting the ultrasonic sensor, line sensors, sensors to avoid obstacles and RGB LED. The board features a two-channel TB6612FNG motor driver, a potentiometer for adjusting the range of obstacle detection, a comparator and a basket for two 14500 batteries. To move, the base uses two N20 motors with a 30: 1 gear with wheels and two support balls.

1. AlphaBot2 interface connector 9. LM393                      
2. Ultrasonic sensor interface 10. Micro N20 motors        
3. Obstacle avoiding indicators 11. Wheels
4. Omni wheel 12. Power supply switch
5. ST188 13. 14500 battery holder
6. ITR20001/T 14. LED RGB
7. Potentiometer 15. Power supply indicator         
8. TB6612FNG

The adapter board is equipped with a Raspberry Pi connector, 5 V voltage stabilizer, PWM controller, ADC converter, joystick, IR receiver and buzzer. Servos controlling the movement of the camera are also connected to the adapter.

1. AlphaBot2-Base interface 7. PWM Controller PCA9685                    
2. Raspberry Pi interface 8. USB-UART CP2102            
3. Serwo interface                9. Joystick
4. USB to UART 10. IR Receiver
5. 5V LM2596 Regulator 11. Buzzer 
6. ADC Converter TLC1543  

The kit is easy to assemble, no soldering required. Full documentation is available on the product Wiki page.

Features

AlphaBot2-Base

  • 5-channel infrared sensor, analog output
  • Built-in modules such as line tracking, obstacle avoidance
  • TB6612FNG - Dual H-bridge motor driver
  • N20 micro geared motor, with metal gears
  • Built-in RGB LEDs

AlphaBot2-Pi

  • Dedicated Raspberry Pi 3B/3B+/4B connector
  • 5V voltage stabilizer (LM2596)
  • TLC1543 ADC chip
  • PCA9685 - PWM control chip
  • Built-in buzzer
  • IR receiver
  • Joystick
  • MicroUSB connector

Kit contains

  • AlphaBot2-Pi (adapter plate)
  • AlphaBot2-Base (robot base)
  • RPi Camera (B)
  • Micro SD card
  • Power Supply
  • USB micro-B to USB Type-C cable
  • 2 x SG90 Servo
  • Set of 2 DOF for the camera
  • IR remote control
  • FC-20-pin cable 8 cm
  • MicroUSB cable
  • FFC 15-pin 25 cm cable
  • A set of screws
  • MicroSD card reader
  • Screwdriver
586694

Manufacturer

  • BTC Korporacja sp. z o. o.
  • Ludwinowo Zegrzyńskie 52G
  • 05-140 Ludwinowo Zegrzyńskie
  • Poland
  • [email protected]
  • 22 767 36 20

Responsible person

  • BTC Korporacja sp. z o. o.
  • Ludwinowo Zegrzyńskie 52G
  • 05-140 Ludwinowo Zegrzyńskie
  • Poland
  • [email protected]
  • 22 767 36 20

You might also like

Other products in the same category (16)