modTTL-RS485 - UART-RS-485 converter module

BOB-09822 - USB to RS-485 Converter

The board, equipped with the TP8485E transceiver, converts UART signals to RS-485, enabling one-way half-duplex communication at a distance of up to 1200 meters. With its compact design, support for 5V or 12V voltage and compatibility with Seeed Studio XIAO boards, it is ideal for applications in industrial automation, monitoring and data acquisition systems. Seeed Studio 113991354

RS485 communication board, SP485/MAX485 on board, 5V

High-speed communication module powered by ADM582E. By communicating with the device via UART, users can take advantage of the RS485 communication protocol with speeds up to 16 Mbps. 410-310

KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS485 serial standard

RS485 communication board, SP3485 on board, 3.3V

USB - RS232/RS485 converter with the original FT2132RNL chip. It uses a USB type A connector and a screw connector to connect RS232 and RS485 interfaces. Supports a wide range of operating systems: Mac, Linux, Android and Windows 11, 10, 8.1, 8, 7. Waveshare USB TO RS232/485

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS422 and RS485 serial standard

TTL - RS485 converter 5V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.

The module with the UART-RS485 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3485 chip and enables data transmission between the UART interface and the RS485 device. Waveshare Pico-2CH-RS485

TTL - RS485 converter 3,3V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.

The TTL TO RS485 (C) module enables the conversion of TTL serial signals to differential RS485 while maintaining high noise immunity and galvanic isolation. With its compact design and built-in ESD and surge protection, it is well-suited for automation systems, IoT, industrial applications, and distributed communication—especially in high-interference environments.

RS485 bus transceiver controlled via USB, equipped with FT230 chip, USB-C connector, ST485BDR controller for 64 devices, galvanic isolation, overvoltage protection and RS485 bus terminator option, ensuring effective and safe communication in industrial systems

UART-RS485 converter module based on the TD (H) 541S485H chip. Equipped with power isolation and TVS. DFRobot DFR0845

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS485 serial standard