Order and pay in
for same day shipping
The board with the RP2040 microcontroller equipped with two ARM...
A set with a development board with the nRF51822 chip, designed for...
Keyboard module with 10 tact switch buttons. The state of the buttons...
Development kit with nRF9160 microcontroller with ARM Cortex M33 core....
A sheet of Teflon foil, dimensions 70x100 mm and thickness 0.6 mm. It...
Extension module with a breadboard designed for micro:bit. There are...
The IO expansion module is designed to work with the micro: bit...
Li-Po battery with a rated voltage of 3.7 V and a capacity of 450 mAh,...
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
|Rozmiar serwa (seria)||Standard|
|Prędkość kątowa||0,16 sek/60°|
|Praca ciągła 360°||Nie|
|Power supply voltage||4,8 - 6 V|
The FS5106B is a general-purpose standard-size analog servo from FEETECH. The output shaft is supported by two ball bearings for reduced friction. The FS5103B works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 700 µs to 2300 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
Note that, as with most hobby servos, stalling or back-driving this servo can damage it.
|Size:||40.8 × 20.1 × 38 mm|
|Speed @ 6V:||0.16 sec/60°|
|Stall torque @ 6V:||6 kg·cm|
|Speed @ 4.8V:||0.18 sec/60°|
|Stall torque @ 4.8V:||5 kg·cm|
|Lead length:||12 in|