- Out-of-Stock
Large Surface Transducer with Wires - 4 Ohm 5 Watt
ID: 557501
This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W
Large Surface Transducer with Wires - 4 Ohm 5 Watt (RoHS)
Description
Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead, a metal rod is wrapped with the voice coil. When current is pulsed through the coil, the magnetic field causes a piece of metal to expand and contract - and if it's pressed against a surface it turns the transducer into a speaker!
Often these size transducers are pressed up against a flat surface to turn it into a sounding board. The effect is a surprisingly clear sound that comes from the surface itself. The body of the transducer is heavy so that it can be placed with the rubber top down on a table. And for another fun trick, put the transducer at the end of a large plastic cup to point sound in a particular direction.
This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W. It's slightly larger than the Medium Surface Transistor. It pairs great with any of our audio amps such as the TS2012 breakout, MAX98306, or you can even try the 20W amplifier, just keep the gain down so you don't overdrive the transducers. Just connect it as you would any other speaker, we even have some wires pre-soldered on.
Technical Details
Dimensions:
- Height: 27mm / 1"
- Diameter: 45mm / 1.8"
- Length of Wires: 120mm / 4.7"
- Weight: 174g
Specs:
- Impedance: 4Ω
- Power rating: 5W
- Datasheet
PRODUCT ID: 1784
557501
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Universal loudspeaker with a power of 20 W and a resistance of 4 Ω. It has a diameter of 105 mm
zł20.54
Delivery date unknown
No product available!
Other products in the same category (16)
Minicomputer with Amlogic S922X processor, which integrates the ARM Cortex-A73 quad-core chip and Cortex-A53 dual-core with Mali-G52 GPU and 4GB of RAM. Additional equipment includes: eMMC memory slot, HDMI, microSD card slot and 40-pin GPIO connector. Hardkernel Odroid N2L
Retired
No product available!
A set of POD modules dedicated to the Raspberry Pi Zero and Zero 2W. Includes Zero POD Case, USB and HDMI expander module and display module. Waveshare Zero POD KIT B
Retired
No product available!
AVT kit for self-assembly of a multi-point thermometer with registration. AVT5420 B
Retired
No product available!
Plastic holder that could fit all the boards with Arduino UNO size (68,6 mm x 53,4 mm). Contains 5 pieces in different colours. A000018
Delivery date unknown
No product available!
No product available!
The MAXimator is an entry-level evaluation board with modern Altera MAX10 FPGA. The board can interface to external peripheral modules via Arduino Uno Rev 3 connectors. It also features HDMI+CEC+DCC and VGA interfaces
Retired
No product available!
No product available!
Small computer based on Samsung Exynos5422 Cortex™-A15 2Ghz and Cortex™-A7 Octa core CPUs. The Ordoid XU4 does not includes Power Supply 5V 4A and Cooling Fan (mounted)
Retired
No product available!
Printed circuit board for universal 24V power supply module. AVT1895 / 24 A
Retired
No product available!
No product available!
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATA8520 SigFox module enabling the implementation of SigFox communication. Arduino MKR FOX 1200 ABX00014
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W