

zł3.44 tax excl.
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The Step-Down converter module allows you to change the input voltage from the range of 7 - 26 V to an output voltage of 5 V, with a maximum instantaneous output current of 3 A and continuous output current up to 1.6 A. The conversion efficiency is a maximum of 96% and ripple outputs are below 30 mV. The module can operate at temperatures from -40 to 85°C. It has compact dimensions of 22.3 x 17 x 4.2 mm.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Step-down converter with adjustable output voltage 1.2V-35V and current efficiency 9A. The module allows to limit the current consumption at the output via a multi-turn potentiometer. modxl4016sd
No product available!
The Step-Down Converter allows you to adjust the output voltage (1.5-35V) and output current (up to 10A, 8A recommended), supporting a maximum of 150W (100W recommended) with an operating temperature of -20 to 75°C and a conversion efficiency of up to 95%. It has short-circuit protection but no reverse input protection.
AP3429A DC-DC Step-Down Converter Module with 1.8 V output voltage, 2.7 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21338
A boost charger module that allows you to charge batteries from USB, DC, or solar panels, and power devices requiring 5V. Equipped with the BQ25185 and TPS61023, it provides high efficiency, optimized power consumption, and support for 500mAh or larger batteries. Adafruit 6106
No product available!
The Step-Down 4A 3.3V/5.2V converter module is a compact device with a large input voltage range, enabling precise conversion to 3.3V or 5.2V output with low static power consumption and low output noise. Perfect for powering electronic projects and microcontroller circuits, offering stability and performance.
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4855
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
Step Down converter module with an output voltage of 5 V and a maximum current of 3 A. The board is equipped with two USB connectors
No product available!
The compact (0.4″ × 0.5″) D24V5F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 500 mA. Pololu 2845
No product available!
Step-Down Voltage Regulator D24V25F5. Pololu 2850
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844
DC-DC Step-Down converter module. It has an input voltage from 6 to 45 V, an output voltage of 6 V and a maximum output current of up to 3.3 A. Pololu 4893
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
No product available!
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm