Step-Down converter module 5V/3.4A D30V30F5
ID: 1188219
zł58.14
Tax included
zł47.27 tax excl.
DC-DC Step-Down converter module. It has an input voltage from 5 to 45 V, an output voltage of 5 V and a maximum output current of up to 3.4 A. Pololu 4892
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
DC-DC Step-Down converter module. It offers a constant output voltage of 5 V and can be powered with a voltage ranging from 5 to 45 V. It has a built-in output current limitation, and in continuous mode it has an efficiency of up to 3.4 A depending on the input voltage.
The module has an efficiency of 80% to 95%. It has a number of built-in protections, including input current limiting, undervoltage lockout and thermal shutdown.
Connections
- PG - Open drain output which goes low when the regulator output voltage increases more than 7.5% above or drops more than 9% below the nominal voltage
- VIN - input voltage
- GND - ground
- VOUT - output voltage
- EN - turning on the converter
Features
- Output voltage: 5 V with an accuracy of 4%
- Input voltage: 5V to 45V
- Efficiency from 80% to 95%, depending on the input voltage and load
- Low Power Mode (EN Input)
- Switching frequency: 700 kHz
- No-load quiescent current 10 to 20 uA per volt
- Switching current limitation
- Output current in continuous mode from 3A to 4A
- Protections: against overheating, soft start function, overvoltage lock
- Dimensions: 17.8 x 20.3 x 9 mm
Kit contains
- Converter module
- Goldpin male straight 6-pin connector
- Goldpin male angled 5-pin connector
1188219
Data sheet
- Output voltage
- 5th
- Output current
- 3,4 A
- Converter type
- Step-down
- Supply voltage min
- 5 V
- Supply voltages max
- 45 V
You might also like
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.90
24h
Available quantity: 1216
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.08
24h
Available quantity: 120
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.72
24h
Available quantity: 113
Available
Other products in the same category (16)
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a lower, user-adjustable voltage set by an on-board trimmer potentiometer. It has an output voltage range of 2.5 V to 7.5 V and a maximum output current of 600 mA.
zł43.57
6 weeks
No product available!
Step-Down DC-DC converter module based on the D24V150F7 chip. Input voltage 9..40V, output voltage 7.5V (max 15A). Pololu 2883
zł518.08
6 weeks
No product available!
Step-Down converter D36V28F12 with an output voltage of 12 V, an input voltage from 12.9 to 50 V and a maximum output current of 3.3 A. Pololu 3786
zł90.98
24h
Available quantity: 2
Available
The energy harvesting module based on the LTC3588 chip, which is a complete energy harvesting solution for sources such as piezoelectric, solar or magnetic transducers. SparkFun BOB-09946
zł199.65
24h
Available quantity: 1
Available
The Step-Down panel-mounted converter module enables precise regulation of input voltage (6V-70V) and output current (0-5A), with a maximum output power of 300W, conversion efficiency up to 95%, and short-circuit and anti-reverse connection protection. The device, with dimensions of 120mm x 64mm x 72mm, is equipped with continuous regulation functions, with a resolution of 0.01V for voltage and 0.001A for current, and operates in a temperature range of -10 to +75 degrees Celsius.
zł209.90
24h
Available quantity: 3
Available
The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.
zł28.62
24h
Available quantity: 3
Available
Step-Down converter with adjustable output voltage from 1.25 to 36 V, input voltage from 4 to 38 V and maximum current up to 5 A
zł7.68
24h
Available quantity: 45
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł33.31
24h
Available quantity: 1
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.3 A and features reverse voltage protection.
zł61.12
6 weeks
No product available!
Step-Down converter D36V50F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 9.5 A. Pololu 4090
zł104.54
24h
Available quantity: 2
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 6 V with an available output current of around 15 A. Pololu 2882
zł497.17
24h
Available quantity: 1
Available
DC-DC Step-Down converter module. It has an input voltage from 6 to 45 V, an output voltage of 6 V and a maximum output current of up to 3.3 A. Pololu 4893
zł62.64
24h
Available quantity: 3
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
zł496.08
6 weeks
No product available!
The 4-channel Step-Down Converter module converts voltages in the range of 13.5-30V to 3.3V, 5V, 12V or regulated 2-28V, with a maximum current of 3A per channel and a total power of 50W. It includes protections and shutdown functions and can operate in temperatures from -40°C to +85°C.
zł59.90
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F1 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 1.8 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 75% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł28.40
24h
Available quantity: 1
Available
DC-DC Step-Down converter module. It has an input voltage from 3.3 to 45 V, an output voltage of 3.3 V and a maximum output current of up to 3.7 A. Pololu 4891
zł59.88
24h
Available quantity: 3
Available
DC-DC Step-Down converter module. It has an input voltage from 5 to 45 V, an output voltage of 5 V and a maximum output current of up to 3.4 A. Pololu 4892