Regulator module 12V Step-Down 100mA D45V1E2F12
ID: 1196555
zł23.43
Tax included
zł19.05 tax excl.
An efficient step-down converter that reduces the input voltage to 12 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<50 μA). It supports input voltage from 12 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5377
Description
The D45V1Ex module is a high-efficiency buck (step-down) voltage regulator that lowers the input voltage to 12 V with a maximum output current of 100 mA. It is a switching regulator (SMPS) characterized by an extremely low quiescent current (below 50 μA), ensuring high efficiency even under light loads. This makes it more energy-efficient than traditional linear regulators. The regulator supports an input voltage range of 12 V to 65 V, with the minimum voltage depending on the voltage drop at a given load. The device features a Power Good (PGOOD) function, which signals correct output voltage, and an EN input that allows the circuit to be disabled, entering a low-power mode (approximately 5 μA in sleep mode). Additionally, a low-voltage threshold can be set using an external resistor. The module is equipped with short-circuit and over-temperature protection, ensuring high reliability. Its compact size facilitates integration into various electronic projects.
Pinout Description
- PGOOD - Open-drain output that goes low when the output voltage drops below 87% of the nominal value.
- EN - The regulator is enabled by default. Setting the EN pin low turns off the power supply and puts the module into low-power mode.
- VIN - Power input
- GND - Ground
- VOUT - Output
Features
- Input voltage: 12 V to 65 V
- Output voltage: 12 V ±4%
- Maximum output current: 100 mA
- Low quiescent current: < 50 μA
- High efficiency even at low loads
- Power Good (PGOOD) function for voltage monitoring
- EN input for enabling/disabling the module
- Short-circuit and over-temperature protection
- Dimensions: 12.7 x 15.3 x 3 mm
- Weight: 0.7 g
Regulator Parameters
1196555
Data sheet
- Output voltage
- 12V
- Output current
- 100 mA
- Converter type
- Step-down
- Supply voltage min
- 12 V
- Supply voltages max
- 65 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 5399
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 197
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 233
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 347
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 19249
Available
Other products in the same category (16)
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a lower, user-adjustable voltage set by an on-board trimmer potentiometer. It has an output voltage range of 2.5 V to 7.5 V and a maximum output current of 600 mA.
zł35.84
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
An efficient step-down converter that reduces the input voltage to 3.3 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltages from 3.3 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5372
zł23.43
4 weeks
No product available!
The energy harvesting module based on the LTC3588 chip, which is a complete energy harvesting solution for sources such as piezoelectric, solar or magnetic transducers. SparkFun BOB-09946
zł163.09
24h
Available quantity: 1
Available
Step-Down converter with an output voltage of 5 V, an input voltage of 6.5 to 16 V and a maximum current of 4 A
zł12.04
24h
Available quantity: 9
Available
Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors
zł23.59
24h
Available quantity: 5
Available
Step-Down converter D36V50F5 with an output voltage of 5 V, an input voltage from 5.5 to 50 V and a maximum output current of 8 A. Pololu 4091
zł156.19
4 weeks
No product available!
Step-Down converter D36V50F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 9.5 A. Pololu 4090
zł137.49
24h
Available quantity: 1
Available
Step-Down converter D36V50F6 with an output voltage of 6 V, an input voltage from 6.5 to 50 V and a maximum output current of 8 A. Pololu 4092
zł137.49
4 weeks
No product available!
A power supply based on a DC-DC converter with a current capacity of up to 5 A. The input voltage can range from 6 V to 36 V, while the output voltage is adjustable from 0.6 V to 36 V. XYS3580
zł116.81
24h
Available quantity: 1
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 6 V with an available output current of around 15 A. Pololu 2882
zł466.10
4 weeks
No product available!
The very small step-down 6 V, 2.5 A synchronous inverter can be supplied with voltage up to 36 V, dimensions: 17.8 mm x 17.8 mm. Pololu 2859
zł87.23
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł149.10
4 weeks
No product available!
DFRobot DFR0205 is a compact and efficient step-down DC-DC converter module with up to 25 W of power, allowing adjustment of the supply voltage to meet the needs of various electronic components. With a voltage regulation function, a quick 5 V selection switch, and an Ovout interface, it enables simultaneous power delivery to components with different voltage requirements. Ideal for prototyping, mobile projects, automation systems, and IoT applications.
zł36.88
24h
Available quantity: 6
Available
The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.08
4 weeks
No product available!
DC-DC Step-Down converter module AP63203 with an output voltage of 3.3 V, an input voltage of 3.8 to 32 V and a maximum output current of 2 A. SparkFun COM-18357
zł25.30
3 weeks
No product available!
An efficient step-down converter that reduces the input voltage to 12 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<50 μA). It supports input voltage from 12 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5377