Wio-E5-LE mini Dev Board – development board with the STM32WLE5JC module and LoRaWAN EU868/US915 - Seeed Studio 113991156
ID: 1200506
5902186318267
zł109.25
Tax included
zł88.82 tax excl.
Wio-E5-LE mini Dev Board Seeed Studio 113991156 is a development board with the STM32WLE5JC module and built-in LoRaWAN support in the EU868/US915 bands, intended for creating energy-efficient IoT applications with long transmission range. It is suitable for prototyping environmental sensors, smart city systems, and precision agriculture solutions.
Description
The Wio-E5-LE mini development board provides access to all GPIO lines of the integrated Wio-E5-LE wireless module, equipped with the STM32WLE5JC microcontroller with an ARM Cortex-M4 core and SX126x transceiver. It supports long-range transmission in the EU868 and US915 bands using the LoRa protocol and (G)FSK, (G)MSK, and BPSK modulation. The transmission range reaches up to 10 km in open conditions, and the standby current is 2.1 µA in WOR mode.
The board is equipped with a USB Type-C connector with a UART converter, RESET and BOOT buttons, and a full set of communication interface pins such as UART, SPI, I2C, and ADC. Thanks to the built-in firmware with AT commands and the possibility of programming through the STM32CubeProgrammer SDK, the board enables quick prototyping of battery-powered IoT network nodes used in precision agriculture, environmental monitoring systems, and industrial automation.
Properties
- Microcontroller STM32WLE5JC with ARM Cortex-M4 core
- SX126x transceiver with support for LoRa, (G)FSK, (G)MSK, BPSK
- Support for EU868 and US915 frequencies
- Maximum transmit power up to +20.8 dBm at 3.3 V supply
- Receiver sensitivity up to -136.5 dBm (SF12, 125 kHz)
- Link budget 158 dB
- Standby current 2.1 µA (WOR mode)
- Interfaces: UART, SPI, I2C, ADC, GPIO
- Connectors: USB Type-C, SMA-K, IPEX, 2× 12-pin headers
- Supply voltage range: 3.7–5 V
- Operating temperature: from -40°C to +85°C
- Certificates: CE, FCC
Included in the set
- Wio-E5-LE mini board
- EU868/US915 antenna
- USB Type-C cable (20 cm)
- Sticker
- 2× 1×12-pin header strips
1200506
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with STM32H743IIT6 microcontroller included with base board and accessories. Includes modules with display, USB, Ethernet, audio, microSD, camera, IMU, and memory and CAN modules. Waveshare OpenH743I-C Package B
zł887.56
4 weeks
No product available!
Universal minicomputer with STM32F103C6 microcontroller (ARM Cortex-M3 @72 MHz, 32 kB Flash, 10 kB RAM, LQFP48 package)
zł41.91
24h
Available quantity: 51
Available
STM32F429IGT6 microcontroller module with base board and accessories included. Waveshare Open429I-C Standard
zł505.46
4 weeks
No product available!
Evaluation board with STM32F207 microcontrollerStarter kit equipped with a microcontroller STM32F207IGH6 (1 MB Flash, Cortex-M3), with a built-in programmer-debugger ST-Link/V2, equipped with a 3.2" TFT LCD display and a full set of connectors.
zł1,940.15
24h
Available quantity: 1
Available
The KAmod BlackPico STM32G030 board, based on the STM32G030F6P6 microcontroller, offers extended communication and signal processing capabilities in a compact form factor. Suitable for embedded, educational, and industrial projects, it enables rapid development using popular toolchains.
zł29.90
24h
Available quantity: 180
Available
Evaluation kit equipped with STM32F103C8T6 microcontroller (ARM Cortex M3, 72MHz, 64kB Flash, 20kB SRAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems.
zł20.84
4 weeks
No product available!
Starter kit with STM32F439NIH6 microcontroller (2 MB Flash, Cortex-M4), with built-in ST-Link/V2 programmer-debugger, 4.7" TFT LCD display and full set of connectors
zł1,362.75
1 weeks
No product available!
STM32 MCU core board, STM32F407IGT6, IO expander, USB HS/FS, Ethernet, NandFlash
zł605.16
4 weeks
No product available!
The STM32U5G9J-DK1 is an advanced discovery kit with the STM32U5G9NJH6Q microcontroller, designed for rapid prototyping and evaluation of STM32U5-based applications. The kit offers a wide range of peripherals, such as USB, a TFT-LCD touchscreen display, and Arduino™ and STMod+ compatible connectors, making it ideal for developing IoT applications and portable devices.
zł477.06
24h
Available quantity: 2
Available
The KAmod BlackPill 411 is an evaluation board featuring the STM32F411CEU microcontroller, offering versatile programming capabilities with a USB-C connector and a pre-installed bootloader compatible with Arduino IDE. Equipped with 32 GPIOs, a modified power circuit, and ESD protection, it is perfect for embedded projects.
zł36.43
24h
Available quantity: 139
Available
Module with the STM32F746IGT6 microcontroller, including a base board and accessories. Waveshare Open746I-C Standard
zł388.26
24h
Available quantity: 1
Available
The Wio-E5 STM32WLE5JC module with LoRa SX126x enables the creation of energy-efficient, long-range IoT solutions with LoRaWAN® support in the EU868, US915, and other bands. Equipped with peripheral interfaces and AT firmware, it ensures fast integration in industrial and environmental applications. Available in tape (cut tape/reel), optimized for production. Seeed Studio 317990829
zł39.90
4 weeks
No product available!
Development board with STM32H725AE microcontroller dedicated to applications combining image processing with artificial intelligence. It comes with a color LCD display with touch panel and a 2 MP camera with OV2640 sensor. Seeed Studio 110991524
zł290.85
24h
Available quantity: 2
Available
The STM32L4R9I-EVAL evaluation set was designed to demonstrate the capabilities of the STM32L4R9AI microcontroller. Mounted connectors allow easy connection of extensions. The board also has a debugger / ST-LINK / V2-1 programmer. STM32L4R9I-EVAL
zł1,722.00
1 weeks
No product available!
Development kit with STM32F407VGT6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core407V
zł90.86
4 weeks
No product available!
Wio-E5-LE Dev Kit – development kit with the STM32WLE5JC module and LoRaWAN EU868/US915 support -...
Wio-E5-LE Dev Kit Seeed Studio 113991157 is a development kit with the STM32WLE5JC module and LoRaWAN support in global frequency bands. Thanks to numerous interfaces and battery power supply, it enables fast creation of energy-efficient IoT devices for applications in environmental monitoring, industry, and smart city systems.
zł140.47
4 weeks
No product available!
Wio-E5-LE mini Dev Board Seeed Studio 113991156 is a development board with the STM32WLE5JC module and built-in LoRaWAN support in the EU868/US915 bands, intended for creating energy-efficient IoT applications with long transmission range. It is suitable for prototyping environmental sensors, smart city systems, and precision agriculture solutions.