Core103V
search
  • Core103V
  • WSH Core103V
ID: 1180634
zł573.94
Tax included

zł466.62 tax excl.

Development kit with STM32F103VET6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core103V

4 weeks
On request
Kamami is the official distributor of Waveshare displays, accessories and modules.

 

Free shipping

free shipping in Poland for all orders over 500 PLN

 

Same day shipping

If your payment will be credited to our account by 11:00

 

14 days for return

Each consumer can return the purchased goods within 14 days

Description

Development kit with a microcontroller from the STM32F103VE family (ARM Cortex-M3 core). It was equipped with the basic elements needed to start the system, configuration switches and a reset button. The user has at his disposal all the pins of the system led out to pin connectors with a pitch of 2.54 mm. It is powered via the miniUSB connector and programmed via the JTAG or SWD interface. There is no debugger on the board, therefore the set requires an external programmer / debugger. Full documentation is available on the product page.

  1. STM32F103VET6:the high performance STM32 MCU which features:
    • Core: Cortex-M3 32-bit RISC
    • Operating Frequency: 72MHz, 1.25 DMIPS/MHz
    • Operating Voltage: 2-3.6V
    • Package: LQFP100
    • I/Os: 80
    • Memories: 512kB Flash, 64kB RAM
    • MCU communication Interfaces:
      • 3 x SPI, 5 x USART, 2 x I2S, 2 x I2C, 1 x FSMC, 1 x LCD, 1 x SDIO, 1 x USB, 1 x CAN
    • AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
  3. Power supply switch, powered from 5Vin or USB connection
  4. Boot mode selection, for configuring BOOT0 pin
  5. Boot mode selection (on bottom side), for configuring BOOT1 pin
  6. Power indicator
  7. VBUS LED
  8. Reset button
  9. 8M crystal oscillator
  10. 32.768K crystal (on bottom side), for internal RTC with calibration
  11. JTAG/SWD interface: for debugging/programming
  12. USB connector, used for establishing USB communication between PC and the STM32 development board
  13. IO expander (including VCC/GND), all the I/O pins are accessible on expansion connectors for further expansion
  14. 5Vin pinheader, 5V power supply input
  15. USB enable jumper
    • short the jumper to enable USB function
    • open the jumper to disable, as well as taking up no I/O port
  16. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to connect the VBAT to external power, such as battery
  17. VREF selection jumper
    • short the jumper to connect VREF+/VREF- to VCC/GND
    • open the jumper to connect VREF+/VREF- to other custom pin via jumper wire

Features

  • STM32F103VE microcontroller
  • Configuration switches and jumpers
  • MiniUSB power connector
  • Power LED
  • SWD and JTAG interface
  • Reset button
  • 3.3 V regulator
  • Dimensions: 68.5 x 55.88 mm

Kit contains

  • Core103V
  • miniUSB cable
1180634

You might also like

Other products in the same category (16)