New products
New products New products
zł134.27
4 weeks
zł4,925.61
4 weeks
zł70.81
4 weeks
STM32373C-EVAL - starter kit with a microcontroller from the STM32 family (STM32F373)
ID: 197134
zł1,817.46
Tax included
zł1,477.61 tax excl.
The starter kit is equipped with a STM32F373VCT6 microcontroller (256 MB Flash, Cortex-M4), with a built-in ST-Link / V2 programmer-debugger, has a TFT LCD display and a full set of connectors.
Description
STM32373C-EVAL starter kit equipped with the STM32F373VCT6 microcontroller. Built-in ST-Link/V2 programmer/debugger allows for quick and easy programming and debugging of the system. The board has connectors that allow you to test all peripherals available in the microcontroller, including: USB FS, USART, audio DAC, ADC microphone, LCD display with a dot matrix, IrDA, LDR, MicroSD card, HDMI CEC, EKG, pressure sensor , CAN, IR transmitter and receiver, EEPROM, touch slider and temperature sensor. The STM32373C-EVAL is the complete demonstration and development platform for the STM32F3 series.
Features
- STM32F373VCT6 microcontroller
- Four 5 V power supply options:
- Power jack
- ST-LINK/V2 USB connector
- User USB connector
- Daughter board
- Audio jack connected to I2S DAC
- Microphone connected to ADC through an amplifier
- 2-GByte (or more) MicroSD card on SPI
- Three components on I2C bus: temperature sensor, EEPROM and dual interface RF EEPROM
- RS-232 communication configurable for communication of Flash loader
- IrDA transceiver
- 240x320 TFT color LCD connected to SPI interface
- Joystick with 4-direction control and selector
- Reset, Wakeup or Tamper, and Key buttons
- 4 color user LEDs
- 2 LEDs for MCU power range indicator
- ECG, pressure sensor and PT100 temperature sensor connected to the 16-bit Sigma Delta ADC of STM32F373VCT6
- Extension connectors for daughter board or wrapping board
- MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
- USB FS connector
- Touch slider
- RTC with backup battery
- CAN 2.0 A/B compliant connection
- Light dependent resistor (LDR)
- Two HDMI connectors with DDC and CEC
- IR transmitter and receiver
- Two ADC & DAC input and output signal connectors and one Sigma Delta ADC input signal connector
- Potentiometer
- JTAG/SWD and ETM trace debug support
- Embedded ST-LINK/V2
197134
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 313
Available
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 33
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 15
Available
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 microcontrollers
zł123.81
24h
Available quantity: 25
Available
Hi-Speed JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
zł4,131.40
24h
Available quantity: 1
Available
Hi-Speed JTAG/SWD Emulator with USB and Ethernet interface, Segger
zł5,221.25
24h
Available quantity: 2
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.97
Delivery date unknown
No product available!
JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
zł3,097.52
24h
Available quantity: 6
Available
Available
J-LINK EDU Mini is a version of the J-Link EDU (8.08.90) in a reduced form factor with identical functionality for Cortex-M based targets. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology. Version for non-commercial use only. J-Link EDU mini
zł264.68
24h
Available quantity: 26
Available
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
zł10.46
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with the STM32F746IGT6 microcontroller, including a base board and accessories. Waveshare Open746I-C Standard
zł388.26
24h
Available quantity: 1
Available
A compact reference platform that enables rapid testing and verification of trace configurations, providing excellent signal quality for analysis. With the ST STM32H743 microcontroller and support for JTAG, SWD and SWO debugging interfaces, the board provides high performance and flexibility in monitoring system performance. Segger STM32H7 Trace Reference Board (6.68.20)
zł1,036.19
1 weeks
No product available!
Test board for testing the emFile NAND controller and compatible memory devices. The base module with the STM32H743 microcontroller works with interchangeable adapters supporting different NAND Flash packages, providing flexibility in testing. Segger NAND Flash Evaluator (6.20.12)
zł1,297.86
1 weeks
No product available!
Compact evaluation board for testing NOR and NAND flash memory supported by emFile drivers. Enables fast and reliable flash programming with SEGGER tools, offering support for various packages such as SO-8, SO-16, BGA and SON. SEGGER (Q)SPI Flash Evaluator (6.40.00)
zł1,036.19
1 weeks
No product available!
The STM32U5G9J-DK1 is an advanced discovery kit with the STM32U5G9NJH6Q microcontroller, designed for rapid prototyping and evaluation of STM32U5-based applications. The kit offers a wide range of peripherals, such as USB, a TFT-LCD touchscreen display, and Arduino™ and STMod+ compatible connectors, making it ideal for developing IoT applications and portable devices.
zł477.06
24h
Available quantity: 2
Available
Kamod BluePill+ is a modern development board with STM32F103 microcontroller, equipped with SPI, I2C, UART interfaces, two 12-bit ADC converters and USB-C connector, ideal for creating projects based on ARM Cortex-M3 architecture
zł21.67
24h
Available quantity: 47
Available
The KAmod BlackPill 411 is an evaluation board featuring the STM32F411CEU microcontroller, offering versatile programming and communication capabilities via USB-C. Compatible with the BlackPill project, it stands out with a modified power circuit, ESD protection, and a pre-installed bootloader for Arduino IDE support. With 32 GPIO pins, an SWD interface, and RTC support, it is an ideal solution for various embedded projects
zł34.39
24h
Available quantity: 402
Available
The KAmod BlackPill 401 is an evaluation board featuring the STM32F401CCU microcontroller, equipped with a USB-C connector with ESD protection and a modified power circuit. With a pre-installed bootloader, it supports Arduino IDE, offering 32 GPIOs and versatile programming and communication capabilities
zł34.80
24h
Available quantity: 256
Available
Kamod BluePill+ - Evaluation board with STM32F103C8T6 microcontroller, compatible with BluePill -...
The Kamod BluePill+ evaluation board equipped with the STM32F103C8T6 microcontroller offers improvements over the original BluePill, such as a new PCB design, a USB-C connector with ESD protection, an improved power supply circuit, and the ability to program via Arduino IDE and STM32CubeIDE
zł24.90
24h
Available quantity: 82
Available
The KAmod BlackPill 401 is an evaluation board with an STM32F401CCU microcontroller, featuring USB-C with ESD protection and a modified power circuit. With a pre-installed bootloader, it supports Arduino IDE, offering 32 GPIOs and versatile programming capabilities
zł36.90
24h
Available quantity: 41
Available
The KAmod BlackPill 411 is an evaluation board featuring the STM32F411CEU microcontroller, offering versatile programming capabilities with a USB-C connector and a pre-installed bootloader compatible with Arduino IDE. Equipped with 32 GPIOs, a modified power circuit, and ESD protection, it is perfect for embedded projects.
zł36.43
24h
Available quantity: 48
Available
STEVAL-FCU001V2 is a compact Flight Controller Unit evaluation board designed to control four quad-copter motors, based on the STM32F401 microcontroller (Arm Cortex-M4). It integrates an IMU (3-axis accelerometer and gyroscope), a MEMS barometric pressure sensor, a Bluetooth Low Energy module, and DC motor drivers, enabling rapid prototyping of flight controllers. STEVAL-FCU001V2
zł208.04
24h
Available quantity: 1
Available
The KAmod BlackPill 401 is an evaluation board with an STM32F401CCU microcontroller, featuring USB-C with ESD protection and a modified power circuit. With a pre-installed bootloader, it supports Arduino IDE, offering 32 GPIOs and versatile programming capabilities
zł35.61
24h
Available quantity: 95
Available
The KAmod BlackPill 411 is an evaluation board featuring the STM32F411CEU microcontroller, offering versatile programming capabilities with a USB-C connector and a pre-installed bootloader compatible with Arduino IDE. Equipped with 32 GPIOs, a modified power circuit, and ESD protection, it is perfect for embedded projects.
zł36.43
24h
Available quantity: 133
Available
STM32N6570-DK Discovery is an advanced evaluation platform for the STM32N657X0 microcontroller, combining a high-performance Cortex-M55 core with AI acceleration, 2.5D graphics, and multimedia support. With integrated communication interfaces, 1 Gb TSN Ethernet, USB-C Power Delivery, audio, and expansion connectors, the kit is ideal for testing IoT, edge AI, communication, and multimedia applications.
zł979.74
1 weeks
No product available!
The KAmod BluePico STM32F030 evaluation board includes the STM32F030F4P6 microcontroller and all necessary components for power supply, programming, and communication. Its compact size and versatile GPIO configuration make it suitable for educational use, prototyping, and embedded industrial applications.
zł22.90
24h
Available quantity: 195
Available
The starter kit is equipped with a STM32F373VCT6 microcontroller (256 MB Flash, Cortex-M4), with a built-in ST-Link / V2 programmer-debugger, has a TFT LCD display and a full set of connectors.