zł18.29 tax excl.
Evaluation kit equipped with STM32F401CCU6 microcontroller (ARM Cortex M4, 84MHz, 256kB Flash, 64kB RAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems.
Evaluation kit equipped with STM32F401CCU6 microcontroller (ARM Cortex M4, 84MHz, 256kB Flash, 64kB RAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripherals, USB Type C connector, SWD connector (for external programmer) and user diode. The set is characterized by small dimensions and allows you to quickly and cheaply start the adventure with 32-bit microcontrollers from the STM32 family.
The set has no built-in programmer. The programming process can be carried out by using an external SWD programmer or using a USB-UART converter and bootloader microcontroller pre-loaded on the factory. The operating mode is configured using BOOT button.
The set works with most popular programming platforms, including Keil, IAR and environments based on the GCC compiler, as well as the Arduino IDE environment.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 microcontrollers
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. DEV-09716
A new programmer-debugger with the USB interface. It supports the STM32 microcontrollers via SWD interface. ZL30PRGv2-1 is compatible with the STMicroelectronics ST-Link/V2-1. It also has the function of USB-UART converter, thanks to which it can successfully replace the KAmodRS module.
UART - USB converter based on the FT232RL chip with TX, RX, RTS and CTS lines led out to the pin connector, the remaining lines available on solder fields for pin connectors. Micro-USB socket. Voltage supply from 3.3 to 5 V. FT232 USB UART Board (micro)
ZL5USB is a USB-UART converter module based on Silabs CP2102. The module has small sizes, microUSB connector and it can works with the 2.5...5.5V signals.
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
The set is equipped with a high-performance STEVAL-FCU001V1 flight control unit, as well as engines, propellers, a plastic frame and a battery needed to assemble its own mini-drone. STMicroelectronics STEVAL-DRONE01
No product available!
STM32L152D-EVAL is an advanced evaluation kit with the STM32L152ZDT6 microcontroller, integrating a wide range of peripherals and displays. It enables full testing of the chip’s capabilities and the development of low-power applications with access to multiple communication interfaces and diagnostic tools.
BlueTile – evaluation board with MEMS sensors and Bluetooth LE for IoT applications. STMicroelectronics STEVAL-BCN002V1B
The starter kit is equipped with a STM32F373VCT6 microcontroller (256 MB Flash, Cortex-M4), with a built-in ST-Link / V2 programmer-debugger, has a TFT LCD display and a full set of connectors.
No product available!
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
The STM3241G-EVAL kit enables full evaluation of the STM32F417 microcontroller’s capabilities and rapid prototyping of applications using communication, audio, memory, Ethernet, and graphical display interfaces. It is designed for engineers developing advanced high-performance embedded systems.
No product available!
Development kit with STM32F105RBT6 microcontroller (128 KB Flash, 64 KB RAM) and L6470 stepper motor driver
No product available!
STM3210C-EVAL is an advanced evaluation board designed for designing and testing applications using the STM32F107VCT microcontroller. It offers a rich set of communication interfaces and peripherals, enabling the development of networking, multimedia, and industrial applications.
No product available!
Development kit with STM32L496ZGT6 microcontroller with built-in ST-Link programmer. Extensive equipment, including: MEMS 6DoF sensor, motor controller, joystick, LED display, 8 LED diodes, RGB LED, audio amplifier, Flash memory QSPI 1 MB, microphone.
Universal minicomputer with STM32F103C6 microcontroller (ARM Cortex-M3 @72 MHz, 32 kB Flash, 10 kB RAM, LQFP48 package)
Development kit with STM32F103R8T6 microcontroller and 2.8 "TFT display with touch panel.
No product available!
Module with the STM32F746IGT6 microcontroller, including a base board and accessories. It contains modules with a display, USB, Ethernet, audio, microSD and a camera. Waveshare Open746I-C Package A
Development kit with STM32F103VET6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core103V
No product available!
KA-NUCLEO-F411CE v2 is a development board based on the STM32F411CE microcontroller. It has a built-in programmer compatible with ST-Link / v2-1, it is possible to program and debug the microcontroller via the USB connector.
The STM32U5G9J-DK1 is an advanced discovery kit with the STM32U5G9NJH6Q microcontroller, designed for rapid prototyping and evaluation of STM32U5-based applications. The kit offers a wide range of peripherals, such as USB, a TFT-LCD touchscreen display, and Arduino™ and STMod+ compatible connectors, making it ideal for developing IoT applications and portable devices.
Evaluation kit equipped with STM32F401CCU6 microcontroller (ARM Cortex M4, 84MHz, 256kB Flash, 64kB RAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems.