STM32L152D-EVAL – evaluation kit with STM32L152ZDT6 microcontroller, TFT LCD, ST-LINK/V2 – STMicroelectronics
ID: 204396
zł1,592.44
Tax included
zł1,294.67 tax excl.
STM32L152D-EVAL is an advanced evaluation kit with the STM32L152ZDT6 microcontroller, integrating a wide range of peripherals and displays. It enables full testing of the chip’s capabilities and the development of low-power applications with access to multiple communication interfaces and diagnostic tools.
Description
STM32L152D-EVAL is a complete evaluation and demonstration kit for ultra-low-power STM32L1 series microcontrollers. The board includes the STM32L152ZDT6 microcontroller (ARM Cortex-M3, 32-bit, 384 kB Flash), a built-in ST-LINK/V2 programmer-debugger, and a rich set of peripherals enabling full assessment of the device’s capabilities.
It integrates, among others: a 240×320 TFT display, a 40×8 segment LCD display, NOR Flash and SRAM memories, a MicroSD card slot, a temperature sensor, RS232, IrDA, audio converters, a microphone with amplifier path, as well as a joystick and buttons. Additionally, it provides a circuit for measuring MCU power consumption and the ability to set the supply voltage of the device in the range of 1.65–3.6 V.
Properties
- Microcontroller: STM32L152ZDT6 (ARM Cortex-M3, 384 kB Flash)
- Built-in ST-LINK/V2 programmer-debugger (JTAG, SWD)
- 240 × 320 pixel TFT display
- 40 × 8 segment LCD display
- MicroSD card slot (2 GB or more)
- NOR Flash memory 128 Mbit
- SRAM memory 512 K × 16 bit
- Serial Flash memory 4 Kbit
- Communication interfaces: RS232 (with RTS/CTS), RS485, IrDA, USB FS
- Temperature sensor (I2C)
- RF EEPROM (I2C)
- DAC converter (internal and I2S)
- Microphone with op-amp paths (amplifier, Sallen-Key filter)
- 4-direction joystick with button
- Reset button and user button
- 4 user LEDs
- 3 power status LEDs
- Microcontroller power consumption indicator
- LDR (light sensor)
- Potentiometer
- ADC/DAC connector
- Motor control connector
- Expansion connectors for daughterboard/wrapping board
- Selectable MCU supply voltage: 3.3 V or 1.65–3.6 V
- Power supply: DC jack, USB ST-LINK/V2, user USB, expansion connector
204396
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 138
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 100
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 322
Available
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 40
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 19
Available
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 microcontrollers
zł104.99
24h
Available quantity: 30
Available
A set of 10 pieces of female-female connecting cables with a length of 21 cm. CAB_F-F (BK-10-25)
zł5.84
24h
Available quantity: 60
Available
A set of 10 pcs. Female brown connecting wires with a length of 25 cm. CAB_F-F (10-25-BRW)
zł5.04
24h
Available quantity: 23
Available
Set of 10 pcs. Female-female connecting wires, 25 cm long. CAB_F-F (10-25 V)
zł5.50
24h
Available quantity: 57
Available
Set of 10 pcs. Female gray connecting wires, 25 cm long. CAB_F-F (10-25-GR)
zł5.35
24h
Available quantity: 141
Available
Set of 10 pcs. Female-female connecting wires, 25 cm long. CAB_F-F (10-25-ORG)
zł5.20
24h
Available quantity: 16
Available
Flash Programmer for ARM and Cortex cores, Segger
zł4,101.91
24h
Available quantity: 1
Available
Available
The popular micro SDHC format, used in smartphones, tablets and cameras. Class 10 product with a UHS-I interface from Goodram. Reading speed: up to 60 MB / s, write: up to 15 MB / s
zł26.54
Delivery date unknown
No product available!
J-LINK EDU Mini is a version of the J-Link EDU (8.08.90) in a reduced form factor with identical functionality for Cortex-M based targets. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology. Version for non-commercial use only. J-Link EDU mini
zł267.96
24h
Available quantity: 13
Available
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
zł10.46
24h
Available quantity: 3
Available
Other products in the same category (16)
Evaluation kit equipped with STM32F401CCU6 microcontroller (ARM Cortex M4, 84MHz, 256kB Flash, 64kB RAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems.
zł22.50
4 weeks
No product available!
The KAmod BlackPill 411 is an evaluation board featuring the STM32F411CEU microcontroller, offering versatile programming capabilities with a USB-C connector and a pre-installed bootloader compatible with Arduino IDE. Equipped with 32 GPIOs, a modified power circuit, and ESD protection, it is perfect for embedded projects.
zł36.43
24h
Available quantity: 138
Available
Development kit with STM32F407VGT6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core407V
zł90.86
4 weeks
No product available!
An evaluation kit dedicated to Internet of Things (IoT) applications that supports Wi-Fi, Sub-GHz 868 MHz, Bluetooth and NFC communication protocols. STMicroelectronics STEVAL-IDI004V2
zł519.00
24h
Available quantity: 3
Available
Development board with STM32H750 microcontroller. Equipped with a WiFi/Bluetooth module, it offers numerous interfaces and a set of external memory extending the possibilities of the system. DFRobot DFR0942
zł459.34
4 weeks
No product available!
Evaluation board with STM32F207 microcontrollerStarter kit equipped with a microcontroller STM32F207IGH6 (1 MB Flash, Cortex-M3), with a built-in programmer-debugger ST-Link/V2, equipped with a 3.2" TFT LCD display and a full set of connectors.
zł1,940.15
24h
Available quantity: 1
Available
STM32 MCU core board, STM32F407IGT6, IO expander, USB HS/FS, Ethernet, NandFlash
zł605.16
4 weeks
No product available!
Development kit with STM32F105RBT6 microcontroller (128 KB Flash, 64 KB RAM) and L6470 stepper motor driver
zł175.94
1 weeks
No product available!
Single board computer with STM32F207VE microcontroller (ARM Cortex-M3, 512 kB Flash, 128 kB RAM, LQFP100).
zł89.90
24h
Available quantity: 235
Available
The KAmod BlackPill 411 is an evaluation board featuring the STM32F411CEU microcontroller, offering versatile programming capabilities with a USB-C connector and a pre-installed bootloader compatible with Arduino IDE. Equipped with 32 GPIOs, a modified power circuit, and ESD protection, it is perfect for embedded projects.
zł36.43
24h
Available quantity: 42
Available
Startup kit with STM32F407ZET6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core407Z
zł162.51
4 weeks
No product available!
The STM32W108B-SK kit provides a complete platform for learning and developing wireless applications based on STM32W108 microcontrollers. The integration of radio modules, support for ZigBee protocols, and a rich set of development tools make it a versatile solution for designers of wireless communication and IoT systems.
zł1,501.88
24h
Available quantity: 3
Available
The KAmod BlackPill 411 is an evaluation board featuring the STM32F411CEU microcontroller, offering versatile programming and communication capabilities via USB-C. Compatible with the BlackPill project, it stands out with a modified power circuit, ESD protection, and a pre-installed bootloader for Arduino IDE support. With 32 GPIO pins, an SWD interface, and RTC support, it is an ideal solution for various embedded projects
zł34.39
24h
Available quantity: 38
Available
The STM32F7 discovery kit allows users to develop and share applications with the STM32F7 Series microcontrollers based on the ARM®Cortex®-M7 core.
zł488.01
24h
Available quantity: 21
Available
Starter kit with STM32F439NIH6 microcontroller (2 MB Flash, Cortex-M4), with built-in ST-Link/V2 programmer-debugger, 4.7" TFT LCD display and full set of connectors
zł1,362.75
1 weeks
No product available!
The set is equipped with a high-performance STEVAL-FCU001V1 flight control unit, as well as engines, propellers, a plastic frame and a battery needed to assemble its own mini-drone. STMicroelectronics STEVAL-DRONE01
zł278.10
1 weeks
No product available!
STM32L152D-EVAL is an advanced evaluation kit with the STM32L152ZDT6 microcontroller, integrating a wide range of peripherals and displays. It enables full testing of the chip’s capabilities and the development of low-power applications with access to multiple communication interfaces and diagnostic tools.