 
        
           
        
           
         
          zł16.94 tax excl.
Evaluation kit equipped with STM32F103C8T6 microcontroller (ARM Cortex M3, 72MHz, 64kB Flash, 20kB SRAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems.
Evaluation kit equipped with STM32F103C8T6 microcontroller (ARM Cortex M3, 72MHz, 64kB Flash, 20kB SRAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems, microUSB connector, SWD connector (for external programmer) and user diode. The set is characterized by small dimensions and allows you to quickly and cheaply start the adventure with 32-bit microcontrollers from the STM32 family.
There are a lot of modules on the market, in which the ST microcontroller has been replaced with non-genuine ones from other manufacturers, which doesn't work with debugger. Buying this module you can be sure that you'll get genuine one.

The set has no built-in programmer. The programming process can be carried out by using an external SWD programmer or using a USB-UART converter and bootloader microcontroller pre-loaded on the factory. The operating mode is configured using BOOT jumpers.
The set works with most popular programming platforms, including Keil, IAR and environments based on the GCC compiler, as well as the Arduino IDE environment.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 microcontrollers
A new programmer-debugger with the USB interface. It supports the STM32 microcontrollers via SWD interface. ZL30PRGv2-1 is compatible with the STMicroelectronics ST-Link/V2-1. It also has the function of USB-UART converter, thanks to which it can successfully replace the KAmodRS module.
ZL5USB is a USB-UART converter module based on Silabs CP2102. The module has small sizes, microUSB connector and it can works with the 2.5...5.5V signals.
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
STM32H743IIT6 microcontroller module with base board and accessories included. Waveshare OpenH743I-C Standard
 No product available!
STM32L152D-EVAL is an advanced evaluation kit with the STM32L152ZDT6 microcontroller, integrating a wide range of peripherals and displays. It enables full testing of the chip’s capabilities and the development of low-power applications with access to multiple communication interfaces and diagnostic tools.
KA-NUCLEO-F411CE v2 is a development board based on the STM32F411CE microcontroller. It has a built-in programmer compatible with ST-Link / v2-1, it is possible to program and debug the microcontroller via the USB connector.
The KAmod BlackPill 401 is an evaluation board with an STM32F401CCU microcontroller, featuring USB-C with ESD protection and a modified power circuit. With a pre-installed bootloader, it supports Arduino IDE, offering 32 GPIOs and versatile programming capabilities
The STM3241G-EVAL kit enables full evaluation of the STM32F417 microcontroller’s capabilities and rapid prototyping of applications using communication, audio, memory, Ethernet, and graphical display interfaces. It is designed for engineers developing advanced high-performance embedded systems.
 No product available!
Development kit with STM32L496ZGT6 microcontroller (ARM Cortex-M4 core) with a built-in ST-Link programmer. Extensive equipment, including: MEMS 6DoF sensor, motor controller, joystick, LED display, 8 LED diodes, RGB LED, audio amplifier, Flash memory QSPI 1 MB, microphone, Arduino connector
Development kit for STM32F107VCT6 microcontrollers, equipped with e.g. a joystick, 4 LEDs, USB host and device, Ethernet module connector, RS232 connector
An evaluation kit dedicated to Internet of Things (IoT) applications that supports Wi-Fi, Sub-GHz 868 MHz, Bluetooth and NFC communication protocols. STMicroelectronics STEVAL-IDI004V2
Evaluation board with STM32F207 microcontrollerStarter kit equipped with a microcontroller STM32F207IGH6 (1 MB Flash, Cortex-M3), with a built-in programmer-debugger ST-Link/V2, equipped with a 3.2" TFT LCD display and a full set of connectors.
Development kit with STM32F105RBT6 microcontroller (128 KB Flash, 64 KB RAM) and L6470 stepper motor driver
 No product available!
The starter kit is equipped with a STM32F373VCT6 microcontroller (256 MB Flash, Cortex-M4), with a built-in ST-Link / V2 programmer-debugger, has a TFT LCD display and a full set of connectors.
 No product available!
Evaluation kit for the STM32L476ZGT6 microcontroller based on the STMicroelectronics ARM Cortex-M4 core. Equipped with three I²C buses, three SPI interfaces, six USART ports, CAN port, SWPMI, two SAI ports, 12-bit ADC converter, 12-bit DAC converter, LCD controller, internal memory and LCD controller. STMicroelectronics STM32L476G-EVAL
 No product available!
Development board with STM32H750 microcontroller. Equipped with a WiFi/Bluetooth module, it offers numerous interfaces and a set of external memory extending the possibilities of the system. DFRobot DFR0942
 No product available!
Startup kit with STM32F407ZET6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core407Z
 No product available!
The STEVAL-STLKT01V1 is a comprehensive development kit designed to support and expand the capabilities of the SensorTile and comes with a set of cradle boards enabling hardware scalability
Kit with STM32F429IGT6 microcontroller, base board and accessories. Includes modules with display, USB, Ethernet, audio, microSD, camera, and memory and CAN modules. Waveshare Open429I-C Package B
 No product available!
 
                    Evaluation kit equipped with STM32F103C8T6 microcontroller (ARM Cortex M3, 72MHz, 64kB Flash, 20kB SRAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems.