Module with MLX90615 temperature sensor

The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555

Module with MLX90614-DCI sensor for non-contact temperature measurement in the range from -70℃ to 270℃. I2C communication. DFRobot SEN0263

Crowtail – Digital Temperature Sensor 2.0 is a precise TMP102 digital sensor with an I2C interface, operating in the range of –40°C to +125°C. Intended for use in temperature-measurement systems in automation, consumer electronics, and environmental monitoring.

Temperature sensor in the form of a HT-NTC100K thermistor on a 1 m cable. Designed for 3D printers

Evaluation board with an IR thermometer MLX90614. The sensor is connected to the ATmega328 microcontroller working at a voltage of 3.3 V with the Arduino bootloader loaded. SparkFun SEN-10740

Module with an analog temperature sensor in the form of a thermistor. Equipped with an XH2.54 connector

LM35 analog temperature sensor module. It allows you to measure the temperature in the range from 0°C to 100°C with a resolution of 0.5°C

The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A. Users may configure the output through I²C to up to 12 bits of resolution as well as setting a trigger to occur when a user defined temperature threshold is reached.. Digilent 410-287

Energy-saving environmental sensor, enabling precise measurement of temperature in the range from -40℃ to +85℃ and atmospheric pressure from 300 to 1100 hPa. Supports I2C and SPI interfaces, and thanks to the FIFO function allows to minimize energy consumption - even to 0.5 μA in standby mode. Compatible with Arduino, Raspberry Pi and Micro:bit, it is ideal for use in DIY projects, educational projects and weather stations. Seeed Studio 110992164

Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556

Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156

Module for high temperature measurement with a range from -200°C to 700°C dedicated to a probe with a K-type thermocouple. Communication via SPI. SparkFun SEN-13266

Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector

The KAmod BMP280 contains a precise BMP280 sensor manufactured by Bosch Sensortec, which enables the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP280 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.

Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895

A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027