- -zł12.05

Parameters
Name | Value |
Frequency Range | 2.405-2.475 |
RSSI | Yes |
Clock | 20 MHz |
Sleep | Yes |
Encryption | AES128 |
Pin Count | 12 |
Features
Operational
Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636
No product available!
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. WiFiBee supports standard IEEE802.11b / g / ni protocols. Can be used as a remote programmer for Arduino tiles. It is powered by 3.3 V. DFRobot TEL0107
Shield - Xbee w / o RF module
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22629
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22631
An adapter that allows you to connect modules in the XBee format to a computer via the USB Type-C interface. The adapter is based on the FT231XS system. SparkFun WRL-22043
No product available!
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
RF module providing wireless connectivity compliant with the IEEE 802.15.4 standard. It operates in the 2.4 GHz ISM band and allows local configuration via BLE with the Digi XBee mobile application. It is equipped with a Silicon Labs EFR32MG SoC transceiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22626
No product available!
SparkFun XBee 3 is a set for wireless communication ideal to start using XBees. These modules enable data transfer from a remote sensor or data transfer from a computer to update the scoreboard or control the robot from the keyboard. Kit-15936
No product available!
A base board that allows you to integrate modern Digi XBee 3 and Digi XBee RR Pro modules with the Arduino format, enabling you to build wireless projects. It uses a USB Type-C connector and a Qwiic connector to connect I2C sensors. SparkFun WRL-22131
No product available!
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22630
No product available!
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. SparkFun WRL-11812