Category: STARTER KITS, PROGRAMMERS, MODULES

The Segger J-Link Signal Smoothing Adapter (8/06/12) is designed to improve signal integrity between the J-Link debug probe and the target debug device. It allows JTAG signals to be suppressed by adjustable series resistors, preventing excessive gain and jitter.

The Segger J-Link Measurement+Patch Adapter allows you to easily customize connections between J-Link or Flasher devices and boards that do not have a standard debug connector. It is equipped with colored wires for signal identification, test points and jumpers for adjusting the voltages on the pins.

The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the Intel FPGA 10-pin JTAG connector, enabling debugging of FPGA-based MCU cores such as the dual-core Arm Cortex-A9 in Cyclone V devices. on Intel FPGA solutions.

Ultrasonic Range Finder

Starter kit with STM32F439NIH6 microcontroller (2 MB Flash, Cortex-M4), with built-in ST-Link/V2 programmer-debugger, 4.7" TFT LCD display and full set of connectors

ARM ULINKpro-D Debug and Trace Unit

A-Star 32U4 Prime SV - a programmable Arduino board, based on the Atmel ATmega32U4 microcontroller from the AVR family. Version with soldered connectors, without micro-SD card slot, without display. Polol 3113

The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3114

Based on the versatile ATmega328, the Metro Mini packs 32KB Flash, 2KB RAM, a clock speed 16Mhz and the Optiboot bootloader. The slick black and gold unit includes 20 GPIO pins. Adafruit 2488 

Flexible 8x32 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0462

STM32 Nucleo expansion board designed to provide an application for the 16 channel LED driver LED1642GW. Depending upon the end application, RGB or single color LEDs can be connected to the board. Separate brightness control is possible for each channel. It is compatible with the STM32 Nucleo board family and equipped the Arduino™ UNO R3 connector layout. X-NUCLEO-LED16A1

embOS designed for ARM Cortex-M and IAR compiler

Waveshare Core429I is a PCB with STM32F429IGT6 microcontroller, contains necessary elements for microcontroller operation, all GPIOs connected to goldpin connectors

The P-NUCLEO-AZURE1 STM32 Nucleo pack is a hardware kit composed of the following boards: NUCLEO-L476RG, X-NUCLEO-IDW01M1, X- NUCLEO-IKS01A2 and X-NUCLEO-NFC01A1

Starter kit designed to work with micro: bit, which includes 8 modules including the most popular digital and analog sensors and executive modules. DFRobot TOY0086

Module with a pulse sensor (heart rate). The board is equipped with a Grove connector and a digital output in the form of pulses. Seeed Studio 101020033

3-port I2C splitter module. The board is equipped with Grove connectors and allows you to connect additional I2C devices. Seeed Studio 103020006