The X-NUCLEO-IHM17M1 is a low voltage three-phase brushless DC motor driver expansion board based on the STSPIN233 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of portable motor driving applications such as thermal printers, robotics and toys

The Pmod BLE module is a Bluetooth module with powerful capabilities. Thanks to communication via the UART port, the module can be connected to any platform equipped with this interface. The module is equipped with the Roving Networks RN4870 system, in which a full Bluetooth interface is built-in. Digilent 410-359

TB67S279FTG stepper motor controller module supplied with 10 ... 47V voltage and 1.2A working current. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2974

A set of 5 modules with a button and LED backlight. The boards are equipped with a Gravity connector and communicate via a digital interface. DFRobot DFR0785

A set of 5 modules with a bistable button and LED backlight. The boards are equipped with a Gravity connector and communicate via a digital interface. DFRobot DFR0789

TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter

Breadboard ZY-208 with dimensions 240 × 210 mm and 3220 tie points, designed for rapid prototyping of electronic circuits without soldering. Suitable for educational, testing, and hobby projects.

Alphanumeric display 16 characters in two rows, content yellow, black background.

The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118

100x16 Graphic OLED Display, 80x36mm, Negative Black Surface, Yellow Dot, 5V, RoHS

The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957

USB / USB type C cable with a long 0.8m long connector. Kruger & Matz KM0363

Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16

Module with 1 optocoupler type QTRXL with RC (digital) output. It is supplied with the voltage from 2.9 to 5.5 V, detects objects at a distance of up to 80 mm. Pololu 4501

WRL-12991

Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 8000 measurements / second. It reaches a range of up to 12 m and a measurement error of 1%. Sparkfun SEN14756

Module with a capacitive fingerprint sensor for the Raspberry Pi. It communicates via the UART or USB interface. SB Components 21253

Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a red nylon braid

Camera with OV7670 CMOS sensor with a resolution of 640x480 px. It communicates via a parallel interface. ArduCAM M0030