Functional module for MicroMod boards. It allows you to add cellular communication to your project using the Notecard - NOTE-NBGL-500 from Blues Wireless. SparkFun WRL-20409

Case dedicated to protect GNSS receivers against difficult field conditions. Custom slots are molded into the case to hold the Facet RTK receiver, 915MHz radio with antenna, power supply, cables and adapters. SparkFun PRT-19642

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

Bluetooth module with integrated HC-08 system. Thanks to the angular pin connector with the bus signals, it is possible to easily connect the module to the contact plate or wires

USGlobalSat\'s EM-506N5 GPS receiver is based on a powerful GNSS receiver from MediaTek, which operates in the L1 band. It allows determining geographic location with an accuracy of up to 2.5 meters. SparkFun GPS-19629

Cables dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun KIT-19627

SMA antenna adapter with magnetic mount. Allows you to mount the antenna on top of your house or car and provide better communication. SparkFun GPS-19576

Sensirion\'s SEN54 sensor module, which combines a sensor that allows measurement of particulate matter, VOCs, humidity and temperature in a single housing. SparkFun SEN-19325

External antenna with 5.8dBi gain dedicated to LoRa communication. It is designed to operate in the frequency band from 863 to 870MHz and is 90cm long. It was made of fiberglass and aluminum. SparkFun WRL-19274

Set with the TIMI-130 module equipped with a 1.3" TFT LCD display with a resolution of 240x240 px, controlled by the PIXXI-28 controller and the Mates Programmer. SparkFun DEV-19256

Module equipped with a 1.3" TFT LCD display with a resolution of 240x240 px controlled by the PIXXI-28 graphics controller. SparkFun LCD-19255

A set with the TIMI-MB module equipped with a 0.96" TFT LCD display with a resolution of 160x80 px, controlled by the PIXXI-28 controller and Mates Programmer. SparkFun DEV-19254

The module is equipped with an RGB 65K display with a resolution of 160x80 pixels and a diagonal of 0.96 inches, which is controlled directly by the PIXXI-28 graphics processor from 4D Labs. It has pins compatible with the prototype board and has been designed to work with development modules equipped with a mikroBUS™ Click socket. SparkFun LCD-19253

A set with a TIMI-96 module equipped with a 0.96" TFT LCD display with a resolution of 160x80 px, controlled by a PIXXI-28 controller and a Mates Programmer. SparkFun DEV-19252

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5057

ESP8266 based Arduino board for ArduCAM mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. ArduCAM B0082

Surface loudspeaker with an impedance of 4 Ω and a power output of 10 W. It is constructed with a coil attached to a pad that conducts vibrations. SparkFun COM-19102

A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with connectors for mounting. Pololu 5065

Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. It has a built-in USB and UART interface. DFRobot SEN0544

DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143