LCD IPS module with a screen diagonal of 1,54" and a resolution of 240x240 pixels. The display has a built-in ST7789 driver and communicates via the SPI interface. The display can also work via the GDI port. DFRobot DFR0649

White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)

Module with an ambient oxygen concentration sensor. The system allows you to measure the oxygen volume in the range up to 25% with a resolution of 0.15%. The module communicates via the I2C interface. DFRobot SEN0322

Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335

The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0152

OLED 64x48 display, white characters / black background, 0.66, 3V power supply, SSD1306 driver, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. 12V

The camera module with the Sony IMX219 sensor with motorized IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0154

DRV8825 Stepper Motor Driver Module for Arduino. It allows you to control two drives, equipped with an XBee connector. DFRobot DRI0023

Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058

White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

A small LCD panel with the ability to control its transparency. The panel can block up to about 95% of light. Adafruit 3627

Antenna with RP-SMA male plug operating in the 433 MHz frequency band. It has a gain of 3 dBi

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19218

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19037

Module with 16x2 characters LCD display and ATMega328p microcontroller. The user can communicate with the module through one of the serial interfaces: UART, I2C or SPI. SparkFun LCD-16396

WIG-12897WAV file player module controlled by UART interface or switching inputs. It is based on a 2 W audio amplifier. The board has a 3.5 mm audio output and a speaker connector. The files are played from the microSD card. SparkFun DEV-13660

GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-15712

The module with 2 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 8 A or a voltage of 28 V DC and a current of 8 A. M5Stack U131

Module with DC motor driver DRV8876. It can work with motors supplied with the voltage from 4.5 to 37 V and the current consumption up to 1.3 A. Pololu 4036

Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection class IP65 (waterproof)