Waterproof temperature sensor adapted to work with Sonoff TH10 / TH16

Hall sensor module. It has a digital output on the XH2.54 connector

OLED display 128x64 1.54 "AA, 3V SPD0301 I2C SPI Parallel White, working temperature from -40 to +70 ext. 12V

OLED display 1.5 ", resolution 128x128 pixels, 3V SSD1327 SPI GRAY SCALE, work temp. From -40 to +70.

Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231

STM32G030K8T6, ARM Cortex-M0+ MCU, 64 kB Flash, 8 kB RAM, 64 MHz CPU, LQFP32

Module with light sensor (photoresistor). An analog output was led out on the XH2.54 connector

Dual MAX14870 Motor Driver is a dual DC motor controller compatible with the Arduino standard that allows you to control two DC motors with 4.5 ... 36V continuous current of 1.7A. Polol 2519

Module with a magnetic sensor based on a reed switch. Reacts to the action of an electromagnet or a permanent magnet

ual MAX14870 Motor Driver is a dual DC motor driver compatible with the Raspberry Pi standard that allows you to control two DC motors with 4.5 ... 36V continuous current of 1.7A. Pololu 3758

Module with an active buzzer. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 107020000

Class D stereo sound amplifier based on the Texas Instruments TPA2016D2 circuit. It can work with 4 Ω speakers with power up to 2.8 W or 8 Ω with power up to 1.7 W in stereo mode. SparkFun DEV-20690

Board with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-19696

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

Module with a joystick with two analog axes (X and Y axis) with a button (Z axis). The board is equipped with an XH2.54 connector and has analog outputs

Module with 4-digit 7-segment display with red digits. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044

Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030

Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192

24-pin ZIF socket dedicated to DIP packages. It allows for multiple plugging without the risk of damaging the leads. Waveshare DIP 24 Pin ZIF Socket (ARIES Black)

40-pin ZIF socket dedicated to DIP packages. It allows for multiple plugging without the risk of damaging the leads. Waveshare DIP 40 Pin ZIF Socket (Green)