Alphanumeric display 16 characters in two rows, content black, white background with backlight.

Module with a black and white, flexible OLED display with a diagonal of 1.81" and a resolution of 160x32 pixels. Communication via the SPI interface. SparkFun LCD-14606

DC motor driver module with two channels, dedicated to use in modeling. It can be controlled by an RC transmitter and uses the PPM signal. DFRobot DFR0513

TB9051FTG Single Brushed The DC Motor Driver Carrier is a single DC motor driver that allows the motor to be supplied with voltage in the 4.5 ... 28V range and power consumption at a continuous 2.6 A (5A peak) operation. Pololu 2997

5-port USB 3.0 Hub with controls and switches for each port. The set includes a 12 V power supply with a capacity of 2 A

RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721

A small module with a 3-axis magnetometer based on the Melexis MLX90393 system. Its resolution is 0.161 μT. I2C or SPI interface is used for communication. The I2C interface has been derived on connectors compatible with the Qwiic standard. SparkFun SEN-14571

A set of conductive materials dedicated to device prototyping. DFRobot FIT0823

Camera module designed for minicomputers Raspberry Pi. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0270

DC motor driver with voltage 6.5 ... 40V and maximum continuous current 13A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3147

This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).

Sensor for measuring the horizontal wind direction. It has a built-in Hall sensor and allows you to determine one of 16 directions. DFRobot SEN0482

STTA112U, ultra-fast high voltage diode, 1200 V, 1 A, SMB

Module with a bistable button and red LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-R

Module with an IR transmitter operating at a frequency of 38kHz. The module is supplied with the voltage from 3 to 5V. FRobot DFR0095

Gravity: Digital IR Receiver Module is a module with an IR receiver operating at 38kHz. The module is supplied with 5V voltage. DFRobot DFR0094

The module with the IMX230 sensor, working with all versions of the Raspberry Pi. The sensor used has a matrix of 21 MP and allows you to record video at resolutions of 5344x4012/9fps. ArduCAM B0324

8 Mpx camera module with IMX219 sensor and wide-angle "fisheye" lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0286

The cap with the inscription "wont fix" dedicated to the button of the mechanical keyboard with switches compatible with Cherry MX. Made of translucent material. Adafruit 5197

An IoT module that combines a microcontroller with an ARM-Cortex M3 core, WiFi and NFC. It can be programmed in the Arduino IDE or in the Micropython language. DFRobot DFR0477