ISG1321 is an industrial camera module with a global shutter, wide field of view and high refresh rate, dedicated to vision systems, high-speed motion capture and inspection tasks. Equipped with a MIPI-CSI interface, it enables integration with modern computing platforms.

A reflective sensor that precisely measures the intensity of light reflected from a surface using an IR LED and a phototransistor. It offers a long detection range—optimally around 20 mm, and up to 80 mm—thanks to the QTRXL sensor with a built-in lens and adjustable LED brightness. It generates a digital RC signal that\'s easily read by microcontrollers like Arduino or Raspberry Pi. Pololu 4540

This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. 

Micro SD card module

A small USB 2.0 hub that allows you to disable individual devices connected to its USB ports, as well as a visual evaluation of the number of devices enabled. It has a built-in connector for the external power supply, so it can act as an active hub. Cable with a length of 40cm, 4 USB ports

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink.

Zeenko ZK09-BM is a low-noise, ultra-wideband RF amplifier with an operating range up to 10 GHz, powered by a built-in battery. Thanks to its good linearity and noise performance, it is used in measurements, receiver paths and communication systems. Compact and mobile, it will work well both in laboratories and in the field.

Simple to use stepper motor driver, compatible with anything that can output a digital 0..5V pulse or 0..3.3V pulse. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. ROB-12779

DRFobot FIT0351-OE

Zeenko ZK04-UM is a compact low-noise RF amplifier operating in the 100 kHz – 4 GHz range, powered via USB-C, featuring high linearity and low noise levels. Ideal for amplifying antenna signals or as a preamplifier for spectrum analyzers such as the tinySA ULTRA, especially above 3.5 GHz.

Zeenko ZK05-UM is a wideband low-noise amplifier with high gain and excellent linearity, operating in the 100 kHz – 6 GHz band. Powered via USB-C, it offers a low noise level and high overload resistance, making it a suitable choice for RF applications, antenna systems, and the input stages of spectrum analyzers.

Zeenko ZK09-UM is a compact low-noise RF amplifier operating in the 100 kHz to 10 GHz band, powered via USB-C and equipped with on-chip bias technology. It provides high linearity, stable gain, and a wide operating bandwidth, serving as an alternative to popular microwave amplifiers in laboratory and measurement applications.

USB splitter allowing to connect up to 4 USB devices. It has a cable with a length of 80cm, a power indicator and the possibility of powering from an external source with a microUSB connector

Zeenko ZK06-BM is a portable, low-noise RF amplifier with battery power, operating in the 10 MHz – 6 GHz band. It offers high gain stability, good overload resistance and full compatibility with spectrum analyzers, including tinySA ULTRA. Particularly recommended for measurement applications and antenna systems.

Zeenko ZK07-BM is a low-noise, wideband amplifier with very high gain, powered by a battery and intended for operation in the 30 MHz – 6 GHz band. Ideal for compensating losses in long antenna lines, it provides up to 43 dB of gain and very good noise performance. Recommended for installation as close to the antenna as possible in receiving and measurement paths.

Zeenko ZK08-BM is a low-noise, wideband amplifier with a built-in battery, intended for operation in the 50 MHz – 8 GHz range. It provides high signal gain and compensation of losses in antenna paths. Thanks to its compact design and battery power, it performs excellently in mobile and measurement applications.

MT41K512M16HA-125 is an 8Gb DDR3 DRAM that operates at up to 800MHz at a low voltage of 1.35V, ideal for systems requiring high bandwidth and energy efficiency. With a 512Mx16 organization and an operating temperature range of 0°C to 90°C, this memory offers fast data access and reliability in a variety of applications such as servers and industrial computers.

A communication module based on the Raspberry Pi RP2040 microcontroller, designed for data transmission in the 868 MHz band. It supports point-to-point LoRa and LoRaWAN operation, offering long range and low power consumption. The board is equipped with six Crowtail interfaces, an integrated battery charging circuit, and the ability to be powered by a solar panel. Compatibility with the Arduino IDE and MicroPython makes it an ideal platform for building IoT nodes, weather stations, and environmental monitoring systems. Elecrow RA-08H LoRaWan Node