CS-Mount lens. 12 mm focal length, 30° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN040

STTA112U, ultra-fast high voltage diode, 1200 V, 1 A, SMB

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae.

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae.

RTL8370N-VB-CG, high-performance 8-port Gigabit Ethernet switch, LQFP128

This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).

DC motor driver with voltage 6.5 ... 40V and maximum continuous current 13A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3147

Module with a color LCD IPS display with a screen diagonal of 1.14" and a resolution of 240x135 px, dedicated to the Raspberry Pi Pico. It communicates via the SPI interface. Pimoroni PIM543

Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1°C and a viewing angle of 110°x75°. Communication with the sensor takes place via the I2C interface. Pimoroni PIM366

Module with an infrared sensor AMG8833 - a measurement matrix with a resolution of 64 pixels (8x8). It offers an accuracy of 2.5°C and the ability to detect people at a distance of up to 7 m. Communication with the sensor is via the I2C interface. SparkFun SEN-14607

A small module with a 3-axis magnetometer based on the Melexis MLX90393 system. Its resolution is 0.161 μT. I2C or SPI interface is used for communication. The I2C interface has been derived on connectors compatible with the Qwiic standard. SparkFun SEN-14571

RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721

Step-Down converter D36V28F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 4.5 A. Pololu 3781

Module with 2 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4202

Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22458

USB / USB type C cable with a long 0.8m long connector. Kruger & Matz KM0363

Module with 3-axis digital compass, HMC5983, I2C, SPI, RoHS

The module with a 10 kΩ slide potentiometer and a color LED indicator, designed for the M5Stack sets. M5Stack U123