Front sensor module of the Zumo 32U4 robot. It is included as part of the Zumo 32U4 robot kit and built into the assembled versions of the Zumo 32U4 robot. The set includes additional infrared connectors and LEDs. Pololu 3122

1.8-meter USB 2.0 cable serving as an extension for connections between devices with USB A plugs. Akyga AK-USB-06

Set with HQ camera, HDMI adapter, 6 mm wide-angle lens and tripod. It works with all versions of Raspberry Pi with a CSI socket. ArduCAM B0241

Set with HQ camera and 6 mm wide-angle lens. The set works with all versions of Raspberry Pi minicomputers with a CSI socket. ArduCAM B0240

The Akyga AK-AD-09 adapter allows you to convert the micro USB port to USB type A, making it easier to connect devices with the OTG function with external data carriers on a 15-cm cable. Akyga AK-AD-09

Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.

Grove module with FSR402 pressure sensor. The board is equipped with a Grove connector with an analog output. Seeed Studio 101020553

Module with a digital temperature and humidity sensor based on the SHT35. Communication via the I2C interface. DFRobot SEN0333

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 500 mA, offering a wide beam angle of 120 °

Module with 2-channel DC motor driver. It allows you to control the drive with a supply voltage from 3 to 11 V and a current of 1.2 A (1.5 A instantaneous). I2C communication. SparkFun ROB-15451

Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098

The camera is equipped with an IMX708 image sensor dedicated to the Raspberry Pi. It offers a resolution of 12 MPx (4608 x 2592 px) and allows you to obtain very detailed photos and videos. The camera is equipped with an integrated IR-CUT filter and supports HDR technology. ArduCAM B0308

The camera is equipped with an IMX708 image sensor. It offers a resolution of 12 MPx (4608 x 2592 px) and allows you to obtain very detailed photos and videos. The camera is equipped with an integrated IR-CUT filter and supports HDR technology. Thanks to the included UVC adapter, it communicates via the USB interface. ArduCAM B0305

The camera is equipped with an IMX708 image sensor dedicated to the Raspberry Pi. It offers a resolution of 12 MPx (4608 x 2592 px) and allows you to obtain very detailed photos and videos. The camera is equipped with an integrated IR-CUT filter and supports HDR technology. ArduCAM B0310

The camera is equipped with an IMX708 image sensor dedicated to the Raspberry Pi. It offers a resolution of 12 MPx (4608 x 2592 px) and allows you to obtain very detailed photos and videos. The camera is equipped with an integrated IR-CUT filter and supports HDR technology. ArduCAM B0309

Flexible extension for a microSD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC.

Flexible 25 cm microSD to SD adapter. Supports all card capacities and types including: 16GB, 32GB, 64GB, 128GB Micro SD/SDHC

Module with USB type C connector designed for prototyping devices. The pins have been led out on the connector with a raster of 2.54 mm, which greatly facilitates the use of USB type C, e.g. with breadboards. SB Components 27330

Module with bipolar stepper motor driver TC78H670FTG. It allows you to control the motor with an accuracy of 1/128 of a step with a voltage from 3.6 to 16 V and a current of up to 2 A. SparkFun ROB-16836

JST-SH 4-pin SMD connector for modules with Qwiic connectors. Pins\' pitch is 1 mm. Qwiic allows you to connect sensors via the I2C bus. SparkFun PRT-16766