COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 350 mA, offering a wide beam angle of 120 °

LED strip with addressable RGB WS2813 diodes on a black PCB. It is powered by 5 V DC, has a length of 1 m and 60 LEDs/m. Protection degree IP67

Module with digital temperature sensor AS6212. It enables measurement in the range from –40°C to 125°C with an accuracy of 0.2°C. SparkFun SEN-18521

A module with a two-channel DC motor driver based on the TB6612FNG system. Designed for Wemos D1 Mini

Step-Down Converter Module allows you to adjust the voltage from 5-36V to 1.3-32V, supporting a maximum of 8A current (5A recommended) and 200W power. It also features voltmeter, ammeter and short circuit protection, offering 94% efficiency and 180KHz switching frequency. XH-M403

A small module with Flash memory W25Q65 with a capacity of 64 Mbit (8 MB). It communicates via the SPI interface

4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401

Module with OV5647 sensor cooperating with ODROID-M1. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. Odroid M1 MIPI-CSI Camera Kit

13/7 PIN adapter is a practical solution that enables a compatible connection between a vehicle\'s electrical system and a trailer with a different socket type. The adapter ensures reliable operation in 12 V systems, increasing the versatility of the tow bar and eliminating the need for modifications to the power system. An ideal choice for drivers using various types of trailers and car haulers.

The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388

A speed controller based on the open VESC standard, designed for skateboards, scooters, and e-bikes. It supports voltages from 14 to 84 V (4S–20S) and continuous currents up to 100 A, offering various BLDC motor control modes and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design, aluminum PCB, and extensive safety features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100 V2

8" TFT LCD display with a touch panel dedicated to Odroid-M1 minicomputers. Equipped with MIPI-DSI interface. It has a resolution of 1280x800 pixels. ODROID-Vu8M

Module with backlight in the form of RGB NeoPixel diode dedicated to CHOC buttons (or compatible). Adafruit 5756

Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18425

A module with a motion sensor that uses microwaves to detect moving objects. It is powered with the voltage of 5 V and has a digital output. DFRobot SEN0521

8-channel voltage level converter allowing for connection of systems operating with the voltage level of 1.8 V, 2.5 V, 3.3 V and 5 V. SparkFun BOB-19626

LoRa module operating at 433 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23233

The Step-Down Converter Module with Voltmeter and Ammeter offers a wide input and output voltage range, with a maximum output current of 12A and a power of 160W. It comes with advanced monitoring and protection features and its conversion efficiency is around 96%.

The Step-Down Converter allows you to adjust the output voltage (1.5-35V) and output current (up to 10A, 8A recommended), supporting a maximum of 150W (100W recommended) with an operating temperature of -20 to 75°C and a conversion efficiency of up to 95%. It has short-circuit protection but no reverse input protection.

2.42-inch OLED display with a resolution of 128x64 pixels with an SSD1309 controller and an SPI interface. It provides high contrast, wide viewing angles, and reliable operation in temperatures from -30°C to 85°C. It operates at a voltage of 2.4 to 3.6 V, and the white display color ensures good readability even in low light. modOLED2.42-W