LVDS to HDMI converter module with one LVDS connector

Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR

A set of converters (transmitter and receiver) HDMI-RJ45 allowing the transmission of HDMI signal up to a distance of 60 m

The camera set with the IMX219 8 MPx sensor allows you to rotate the camera, control the angle of inclination and zoom. Works with Raspberry Pi. Swivel base included. ArduCAM B0167B8

Camera with OV7251 CMOS sensor with a resolution of 640x480 px. Equipped with a snapshot, it communicates via 1-lane MIPI interface. ArduCAM U6070

Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. Communicates via the I2C interface. Pololu 3417

4-channel module with relays, designed to work with the Raspberry Pi. It can switch 120VAC/2A or 24VDC/2A signals. SB Components 14071

3-channel voltage and current monitoring module designed to work with the Raspberry Pi. It can measure voltage ranging from 0 to 26 V and voltage ± 3.2 A. SB Components 20805

The NFC module kit based on the ST25R3911B chip and the STM32F103RBT6 microcontroller enables wireless transfer of graphics from a microSD card to Waveshare e-Paper displays with NFC. Equipped with a 1.3" OLED display, a CP2102 USB-UART converter, 1 Mbit SRAM memory and user interfaces, it supports rapid prototyping of NFC applications and wireless communication systems. Waveshare 17623

Communication module with R800C chip designed for Raspberry Pi minicomputers. It adds support for GSM/GPRS (2G) networks. Waveshare SIM800C GSM/GPRS HAT

Converter adapter with cable Akyga AK-AD-56 USB type C (m) / DisplayPort (f) 15cm. Akyga AK-AD-56

4-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 06670

Bluetooth module with integrated HC-08 system. Thanks to the angular pin connector with the bus signals, it is possible to easily connect the module to the contact plate or wires

4-pin cable with JST SH connector compliant with STEMMA QT/Qwiic. Ended with alligator clips. Adafruit 4398

Two-channel driver of direct current (DC) motors with an operating voltage from 6 to 30 V and a maximum continuous current of 20 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD20A

Module with a 3-axis ADXL345 accelerometer with a configurable measuring range of ±2/±4/±8/±16 g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020054

2-position waterproof self-locking rotary switch, 19 mm in diameter, in a stainless steel housing. White colour

Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005

The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano. SB Components 21482

Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi. It communicates via the USB interface. SB Components 21185