Angled male socket, wire-board type, for JST PH-2.0 wires, 2-pin, 2mm pitch, 100V, 2A. Set of 10 pieces

Pin header goldpin black 2x10 pins. Straight connector for SMD assembly. 2.54mm pitch.

The SODD-150008-03G connector is an 8-pin microSIM card holder, ideal for devices requiring reliable SIM card support, with a compact design that allows for easy integration into space-constrained designs. Surface-mount (SMT) compatible, it provides a secure and durable card connection, minimizing the risk of accidental disconnection.

10 MHz chassis resonator in a housing with dimensions of 5.0 x 3.2 mm, with two pins

5-wire cable, 10 cm long, with a JST SH-1.0 female plug at both ends

The LM4950 audio power amplifier module with a power of 3 W per channel, powered by 10-15 VDC, equipped with a 3.5 mm Jack socket for audio input and screw connections for loudspeaker outputs, is equipped with thermal and short-circuit protection. It provides good sound quality with low energy consumption, making it ideal for small audio systems

8-pin RJ-45 plug

KAmodL3GD20 is a digital gyroscope module with L3GD20 chip. It makes possible to measure angular velocity up to ± 2000 degrees per second. It has a embedded voltage regulator and level translators on SDA/SCL lines, thanks to which it can be used in systems supplied with a voltage of 2.5 V-5.5 V. KAmodL3GD20

Adapter QFP44/LQFP48 to DIP44/DIP48 in the form of a PCB. It can be used as an adapter for a programmer, breadboards or prototype structures

Analog Switch ICs 5-V, 2:1 (SPDT), 2-channel analog switch with powered-off protection 10-VSSOP -40 to 125°C, , VSSOP-10

Adapter QFN32/QFP32 to DIP32 in the form of a PCB. It can be used as an adapter for a programmer, breadboards or prototype structures

32bit ARM Cortex-M0, 32K Flash, 4K RAM, HVQFN33, RoHS

LT8911EXB, MIPI DSI/CSI Bridge to eDP, QFN48

Mounting potentiometer, 10k

Light-emitting diode (LED) with a beam angle of 120 ° and luminosity of 100 mcd. The maximum current of the diode is I _max = 20mA (2.0V), and the wavelength is 474 nm (green). LED ALS-0805G-00100-120

45 V, 100 mA NPN general-purpose transistors, SOT23, NXP, RoHS

USB Type-C socket with panel mounting for easy installation. Only 2 power pins

The RS-485 / RS-422 transceiver from Maxim Integrates in the SO8 housing, allows the transmission of a signal with a throughput of up to 2.5Mbit / s, it has the ability to support up to 32 devices on a shared bus

MicroHDMI - HDMI cable in white color, 2 m long. Intended for use with Raspberry Pi 4 model B and Raspberry Pi 5