Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae.

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae.

The Akyga DVI cable with the AK-AV-02 model, 1.8 m long and with a ferrite filter, is a premium product. It is designed to connect devices with a DVI-I 24+5 connector. It enables the transmission of both analog and digital signals in Full HD quality. Akyga AK-AV-02

Module with 5 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4405

Module with 5 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4305

TS331ILT, Micropower low-voltage, rail-to-rail comparators, SOT-23-5

A set of adapters dedicated to the XGecu T56 universal memory programmer. Enable memory support in BGA48, BGA63, TSOP56, SOP56 and EMMC153/160 package

Module with sensor TMP117. It enables measurement in the range from –55°C to 150°C with a very high accuracy up to ± 0.1°C. It communicates via the I2C interface. Adafruit 4821

This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.

Module with 9 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4309

Gravity: The high temperature sensor is a sensor based on the PT100 probe and adapted to very high temperatures (30-350 ° C). The module is powered by 3.3 ... 5.5V voltage. DFRobot SEN0198

Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.83

A 5-inch display with an IPS LCD matrix with 800 x 480 pixel resolution and touch panel. It has a slim and lightweight design. It communicates via DSI (image display) and I2C (touch panel) interfaces. Waveshare 50H-800480-IPS-CT

Module with black and white e-Paper display, 3.7" diagonal and 480x280 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-3.7

A 4.3-inch display with an IPS LCD matrix with 800 x 480 pixel resolution and touch panel. It has a slim and lightweight design. It communicates via DSI (image display) and I2C (touch panel) interfaces. Waveshare 43H-800480-IPS-CT

Module with a flexible e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.9-D

Adapter for the 6-pin JST SH connector (horizontal) with a pitch of 1 mm to the DIP holes, pitch of 2.54 mm. Pololu 4772

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36V and efficiently reduces it to 5V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.5A and features reverse voltage protection. Pololu 2858

Adafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078