Single-channel brushed DC motor driver based on the MPQ6612A chip, enabling bidirectional motor control with a supply voltage of 4-40 V and up to 4 A continuous current. The module provides motor current sensing, active current limiting, overcurrent and thermal protection, and supports PWM control up to 200 kHz. The carrier board does not include soldered connectors, allowing direct soldering of wires or custom connectors. Pololu 5285

USR-G805s-G is an industrial router with Dual SIM support, LTE connectivity and five Ethernet ports, designed to operate in conditions requiring continuous connectivity and high reliability. It is suitable for automation systems, supervision, distributed IoT applications and remote monitoring.

Development board featuring a 13.3-inch E-Ink Spectra 6 color display with a resolution of 1600 x 1200 px, supporting six colors. The ESP32-S3 provides WiFi and Bluetooth 5 LE connectivity, while 32 MB Flash and 16 MB PSRAM support advanced interfaces and IoT projects. Version 333366 includes an enclosure and a 3000 mAh Li-Ion battery. Soldered 333366

Open-source USB-C debug tool providing UART access through the SBU1 and SBU2 pins of a USB-C connector. Features three USB-C ports, selectable 1.8V/3.3V logic levels, speeds up to 3Mbps and a virtual COM port. Soldered 333367

A compact digital rotary encoder module designed for simple and intuitive volume control in arcade and DIY projects. Ready to use without soldering, simply connect it to the "Encoder" port on the Picade Max USB Audio board. In addition to volume control, the encoder offers a mute function when the knob is pressed. Pimoroni PIM770

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CU-0100-G

Pololu 3761 is a compact 1.3″ OLED display with SPI interface and 128×64 resolution, based on the SH1106 controller. Thanks to bright white pixels, high contrast, and low power requirements, it is suitable for microcontroller applications that require a clear graphical user interface.

Digital audio amplifier dedicated to woofers. It has one channel with a power of 50W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 25 V

Industrial USB 3.0 monochrome camera featuring a 5MP OG05B1B global shutter sensor, delivering 2592 × 1944 px at 25 fps (USB 3.0), high sensitivity, low noise, and enhanced near-infrared (NIR) performance. Equipped with a low-distortion M12 lens, USB 3.2 Gen 1 (Type-C) interface, and onboard hardware ISP. Enclosure-free version designed for embedded system integration and industrial applications. Arducam B0538

The USR-IO0404 is an industrial I/O expansion module from the USR-IOxx series, equipped with 4 analog inputs (4–20 mA) and 4 analog outputs (current/voltage), designed for industrial automation and monitoring applications. Communication is carried out via the RS485 interface. USR-IO0404

The USR-G806p-G router with a Qualcomm processor, LTE connectivity, Wi-Fi, RS232/RS485 ports and GNSS function provides stable data transmission and versatility in industrial applications. Support for two SIM cards, extensive VPN options and resistance to environmental conditions make it a solution for complex automation and IoT systems.

LED and audio controller designed for lighting effects in LEGO® compatible models, dioramas and decorations. It offers six mono channels, one RGB channel, audio amplifier, sensor inputs and a Qw/ST connector – all without the need for soldering. It enables the creation of advanced animations, lighting effects and synchronized audio in a compact form factor. Pimoroni PIM719

A multi-channel light and color sensor operating as a miniature spectrometer, enabling detailed analysis of the light spectrum. The device offers 14 measurement channels covering 11 visible light bands, a near-infrared (NIR) channel, an unfiltered channel, and flicker detection. Communication with the microcontroller is via an I²C interface, and the STEMMA QT/Qwiic board allows for quick connection to platforms such as Arduino and Raspberry Pi. The built-in 16-bit ADC and SMUX system ensure precise measurements and flexible management of detection channels. Adafruit 6477

Quad-band GNSS RTK module supporting L1+L2+L5+E6 frequency bands, providing centimeter-level RTK positioning and simultaneous multi-constellation reception, supplied with an RTC battery. LG290P GNSS RTK Module Waveshare 33000

A compact 8MP USB camera module with an autofocus lens and built-in microphone. Based on the Sony IMX219 sensor, it captures 3280 x 2464 px video at 30 FPS, providing detailed image and sound in a single device. UVC compliance and a wide 62° field of view make it ideal for VR, surveillance, microscopy, and embedded applications without the need for additional drivers. ArduCAM B0431

The 10.85-inch e-paper display from Waveshare with HAT+ module is an advanced solution for low-power information display in industrial, advertising, and informational applications. Support for four colors and full compatibility with Raspberry Pi and other microcontrollers via SPI make it a versatile tool for projects requiring durable and highly readable data presentation.

MiniPCIe wireless network card module based on the Intel AX210 chip supporting the Wi-Fi 6E (802.11ax) standard and Bluetooth 5.3. Enables communication in the 2.4 GHz, 5 GHz, and 6 GHz bands with maximum throughput up to 574 Mb/s (2.4 GHz) and 2400 Mb/s (5 GHz / 6 GHz), using MU-MIMO technology to improve transmission efficiency. The design features IPEX-4 antenna connectors and is compatible with Linux and Windows 10 / 11 systems. Waveshare Wireless-MINIPCIE-AX210

5-inch DSI display with 720 × 1280 px resolution featuring an IPS panel and 5-point capacitive touch, manufactured using optical bonding technology with a toughened glass surface. Version with a black protective enclosure designed exclusively for Raspberry Pi 5, enabling clean and mechanically secured installation. Waveshare 5-DSI-TOUCH-B-WITH-CASE

MiniPCIe wireless network card module based on the Intel AX200 chip supporting the Wi-Fi 6 (802.11ax) standard and Bluetooth 5.2. Enables communication in the 2.4 GHz and 5 GHz bands with maximum throughput up to 574 Mb/s (2.4 GHz) and 2400 Mb/s (5 GHz), using MU-MIMO technology to improve transmission efficiency. The design features IPEX-4 antenna connectors and is compatible with Linux and Windows 10 / 11 systems. Waveshare Wireless-MINIPCIE-AX200

Digital MEMS microphone breakout based on the SPK0641HT4H with PDM output, 20Hz–20kHz frequency response and 64.5dB SNR. Features L/R channel selection, 3.3V supply and a compact 22 × 22mm board. Soldered 333357