Category: ELECTRONICS

TPA3110 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W

Panel thermometer with a 7-segment LED display with a measuring range from -50 to 110 °C. It is powered with the voltage of 12 V

IC socket in DIP18 package, 18-pin, 2.54 mm pitch, 7.62 mm pitch, RoHS

30-wire connection cable for the OpenScope MZ measuring adapter. It allows pins to be connected to the 2x15 male connector. The cable also allows you to easily connect the attachment to other sets. Digilent 310-099

GL5528, Photoconductive cells 10-20 kOhm, 5 mm

Module with a flexible e-Paper display with a diagonal of 10.3" and a resolution of 1872x1404 px. Communication via USB, SPI or I80 interface. Waveshare 10.3inch e-Paper HAT (D)

DAQ device based on Ethernet communication and equipped with 24 digital inputs/outputs and a counter input. It allows you to control devices via the Internet. Digilent 6069-410-052

DAQ device based on USB communication and equipped with 96 digital inputs/outputs and a 32-bit counter. Digilent 6069-410-032

DAQ device based on USB communication and equipped with 8 counter inputs, 4 PWM outputs and 8 digital IOs. Digilent 6069-410-028

1.9" black and white e-Paper display. Built with 91 segments, communicates via I2C interface. Without PCB. Waveshare 1.9inch e-Paper segment

Module with FM receiver, with its help it is possible to receive radio waves broadcast in the FM band (frequency 50-115MHz). The module has been equipped with a 3,5mm jack socket, through which you can connect headphones. The module has a connector in accordance with the Grove standard. Seeed Studio 107020006

Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 2 to 8 Ω. Powered with DC voltage from 12 to 24 V. Fosi Audio BT20A

Single-core, multi-strand wire in black silicone insulation. 18AWG thickness, 4m length

USB-UART converter based on the CP2102N chip. Compatible with a voltage of 3.3 V, it has been equipped with a USB type C connector. Adafruit 5335

Stereo audio amplifier with Bluetooth communication. It can be powered with the voltage from 8 to 26 V and has two outputs with a power of 50 W. The set includes a remote control

Dual DC motor controller with voltage from 2.5 to 9.5V with 1A continuous current per channel. Has an embedded voltage regulator. Cytron Maker Drive

Industrial microSD UHS-1 memory card with a capacity of 16 GB for ODROID N2 with pre-loaded Linux software.

Module with a reed relay BR-500Ω with a load up to 0.5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020014

Class D PAM8410 class D stereo digital audio amplifier. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W per channel

Integrated circuit for communication with mass storage devices using the Fiber Channel protocol. Maxim integrated MAX3750CEE+T.